Tired of your Remington electric chainsaw chain coming off You’re not alone. This is a common problem, but there are a few simple solutions that can help you get back to work quickly. In this blog post, we’ll discuss the most common causes of chain coming off, and we’ll provide step-by-step instructions on how to fix it. We’ll also offer some tips for preventing this problem from happening in the future.
So Chain Keeps Coming Off Remington Electric Chainsaws
How to Stop Your Remington Electric Chainsaw Chain from Coming Off
1. Inspect the chain brake:
The chain brake is a safety device that prevents the chain from moving when the chainsaw is not in use. If the chain brake is not working properly, it can allow the chain to come off.
2. Adjust the chain tension:
If the chain is too loose, it can come off. To adjust the chain tension, loosen the bar nuts and slide the chain up or down on the bar until it is snug against the bar rails. Tighten the bar nuts.3. Sharpen the chain:
A dull chain can come off more easily than a sharp chain. To sharpen the chain, use a chainsaw file to remove the burrs from the cutting teeth.
4. Lubricate the chain:
A dry chain can come off more easily than a lubricated chain. To lubricate the chain, apply a light coat of chain oil to the chain and bar.
5. Inspect the chain regularly:
Look for signs of wear and tear, such as missing or damaged teeth, a stretched chain, or a broken chain link. If you find any damage, replace the chain.
Chain Keeps Coming Off Remington Electric Chainsaws
Causes
There are a few possible causes for a chain to keep coming off a Remington electric chainsaw.
Improper tensioning:
The chain must be properly tensioned in order to stay on the saw. If the chain is too loose, it will come off easily. If the chain is too tight, it will be difficult to operate the saw and may damage the engine.
Dull chain:
A dull chain will not grip the wood properly and will be more likely to come off.
Damaged chain:
A damaged chain, such as one with broken or missing teeth, will not be able to stay on the saw.
Worn sprockets:
The sprockets on the saw drive the chain. If the sprockets are worn, they will not grip the chain properly and it will be more likely to come off.
Dirty saw:
A dirty saw can cause the chain to come off. Sawdust and other debris can build up on the saw and cause the chain to slip.
Solutions
There are a few things you can do to prevent a chain from coming off a Remington electric chainsaw.
Properly tension the chain:
The chain should be tensioned so that it is snug against the bar, but not so tight that it is difficult to turn the handwheel.
Sharpen the chain:
A dull chain will not grip the wood properly and will be more likely to come off.
Replace the chain:
If the chain is damaged, it should be replaced.
Replace the sprockets:
If the sprockets are worn, they should be replaced.
Clean the saw:
The saw should be cleaned regularly to remove sawdust and other debris.
Prevention
You can also take steps to prevent a chain from coming off a Remington electric chainsaw.
Tighten the chain regularly:
The chain should be tightened regularly to ensure that it is properly tensioned.
Sharpen the chain regularly:
The chain should be sharpened regularly to ensure that it is sharp.
Inspect the chain regularly:
The chain should be inspected regularly for damage. If the chain is damaged, it should be replaced.
Clean the saw regularly:
The saw should be cleaned regularly to remove sawdust and other debris.
By following these tips, you can help prevent a chain from coming off your Remington electric chainsaw.
Also Read THis: Chain Keeps Slipping Off Electric Chainsaw
FAQs: Chain keeps coming off Remington electric chainsaws
Why does the chain keep coming off my Remington electric chainsaw?
There are a few reasons why the chain on your Remington electric chainsaw might keep coming off. Here are some of the most common causes:
The chain is not properly tensioned: If the chain is too loose, it will be more likely to come off. To check the tension, follow the instructions in your chainsaw’s owner’s manual.
The chain is worn out: A worn-out chain will not grip the wood properly and is more likely to come off. Replace the chain if it is damaged or worn out.
The bar is bent: A bent bar can cause the chain to come off. If the bar is bent, you will need to have it straightened or replaced.
The sprocket is damaged: The sprocket is the gear that drives the chain. If the sprocket is damaged, it can cause the chain to come off. Replace the sprocket if it is damaged.
The chainsaw is not being used properly: If you are not using the chainsaw properly, it can cause the chain to come off. Make sure you are following the instructions in your chainsaw’s owner’s manual.
How do I tighten the chain on my Remington electric chainsaw?
To tighten the chain on your Remington electric chainsaw, follow these steps:
1. Turn off the chainsaw and disconnect the spark plug wire.
2. Locate the chain tensioning screw. It is usually located on the side of the chainsaw.
3. Use a screwdriver to turn the tensioning screw clockwise until the chain is tight.
4. Reattach the spark plug wire and start the chainsaw.
5. Test the chain tension by pulling on it. The chain should be tight enough so that it does not come off, but not so tight that it is difficult to move.
How do I replace the chain on my Remington electric chainsaw?
To replace the chain on your Remington electric chainsaw, follow these steps:
1. Turn off the chainsaw and disconnect the spark plug wire.
2. Remove the old chain.
3. Align the new chain with the bar.
4. Install the new chain.
5. Tighten the chain tensioner.
6. Reattach the spark plug wire and start the chainsaw.
How do I prevent the chain from coming off my Remington electric chainsaw?
To prevent the chain from coming off your Remington electric chainsaw, follow these tips:
Tighten the chain regularly: The chain should be tight enough so that it does not come off, but not so tight that it is difficult to move.
Inspect the chain regularly for wear and tear: Replace the chain if it is damaged or worn out.
Be careful not to drop the chainsaw: Dropping the chainsaw can damage the bar and sprocket, which can cause the chain to come off.
Use the chainsaw properly: Make sure you are following the instructions in your chainsaw’s owner’s manual.
What should I do if the chain keeps coming off my Remington electric chainsaw?
If the chain keeps coming off your Remington electric chainsaw, you should take the following steps:
Check the chain tension. Make sure the chain is tight enough so that it does not come off, but not so tight that it is difficult to move.
Inspect the chain for wear and tear. Replace the chain if it is damaged or worn out.
Check the bar and sprocket for damage. Replace the bar or sprocket if it is damaged.
Make sure you are using the chainsaw properly. Follow the instructions in your chainsaw’s owner’s manual.
If you have tried all of these steps and the chain is still coming off, you should take the chainsaw to a qualified service technician for repair.
