Craftsman Chainsaw Chain Oiler Not Working

As a chainsaw owner, there are few things more frustrating than having your chain oiler stop working. Not only does it make it difficult to keep your chain lubricated and running smoothly, but it can also lead to damage to your saw. If your craftsman chainsaw chain oiler is not working, there are a few things you can check to try to troubleshoot the problem. In this guide, I will walk you through the steps of diagnosing and resolving this common issue. By the end of this guide, you should be able to get your chainsaw chain oiler up and running again in no time.

The Importance of a Working Chain Oiler

The chain oiler on your chainsaw is essential for keeping your chain lubricated and running smoothly. When the chain is properly lubricated, it will cut more efficiently and produce less sawdust. It will also wear out more slowly, saving you money in the long run. If your chain oiler is not working, your chain will quickly become dry and gummy, which can lead to all sorts of problems. Your chain may start to skip or bind, which can be dangerous. It may also overheat and damage the bar and chain.

Troubleshooting a Craftsman Chainsaw Chain Oiler

If your craftsman chainsaw chain oiler is not working, there are a few things you can check to try to troubleshoot the problem.

1. Check the oil level. The first thing you should do is check the oil level in the reservoir. If the oil level is low, simply add more oil to the reservoir.
2. Check the oil line. The next thing you should check is the oil line. Make sure that the oil line is not kinked or blocked. If the oil line is blocked, you will need to clear the blockage.
3. Check the oil pump. The oil pump is responsible for pumping oil from the reservoir to the chain. If the oil pump is not working properly, you will need to replace it.
4. Check the oil filter. The oil filter is located in the oil reservoir. It helps to keep dirt and debris out of the oil pump. If the oil filter is clogged, it can restrict the flow of oil to the chain. You should clean or replace the oil filter regularly.

By following these steps, you should be able to troubleshoot and resolve the issue of a craftsman chainsaw chain oiler that is not working.

Why Craftsman Chainsaw Chain Oiler Not Working

Insufficient Oil

The most common reason for a chainsaw chain oiler not working is that there is not enough oil in the reservoir. Check the oil level and add more oil if necessary.

Clogged Oil Line

Another common cause of a chainsaw chain oiler not working is a clogged oil line. The oil line can become clogged with sawdust, dirt, or other debris. To clean the oil line, remove the oil tank and the oil filter. Then, use a small brush or pipe cleaner to clean out the oil line.

Faulty Oil Pump

If the oil pump is faulty, it may not be able to pump oil to the chain. To check the oil pump, remove the oil tank and the oil filter. Then, turn the chainsaw on and listen for the oil pump to work. If you do not hear the oil pump working, the oil pump may be faulty and will need to be replaced.

Clogged Oiler Hole

The oiler hole can become clogged with sawdust, dirt, or other debris. To clean the oiler hole, use a small brush or pipe cleaner to clean out the hole.

How to Troubleshoot: Craftsman Chainsaw Chain Oiler Not Working

Symptoms of a Craftsman Chainsaw Chain Oiler Not Working

There are a few symptoms that can indicate that your Craftsman chainsaw chain oiler is not working properly. These include:

The chain is not being lubricated properly, which can lead to excessive wear and tear on the chain and sprockets.
The chain is smoking or burning, which is a sign that it is overheating due to lack of lubrication.
The chain is making a loud noise, which can be caused by the chain rubbing against the bar.
The chain is skipping or jumping, which can be caused by the chain being too tight or by the bar being warped.

Troubleshooting a Craftsman Chainsaw Chain Oiler

If you are experiencing any of the symptoms listed above, it is important to troubleshoot the problem to determine the cause. Here are a few things you can check:

Check the oil level. Make sure that the oil reservoir is full and that the oil is flowing freely. If the oil level is low, add more oil to the reservoir. If the oil is not flowing freely, you may need to clean the oil line or replace the oil pump.
Check the oil filter. The oil filter can become clogged with debris, which can prevent the oil from flowing to the chain. Remove the oil filter and clean it with a solvent. If the filter is damaged, replace it with a new one.
Check the oil pump. The oil pump is responsible for pumping oil to the chain. If the oil pump is not working properly, it will not be able to lubricate the chain. You can test the oil pump by removing the oil line from the bar and checking to see if oil is flowing out of the line. If no oil is flowing, the oil pump may need to be replaced.
Check the bar and chain. The bar and chain can become worn over time, which can lead to problems with lubrication. Check the bar and chain for wear and tear and replace them if necessary.

Preventative Maintenance

The best way to prevent problems with your Craftsman chainsaw chain oiler is to perform regular maintenance. Here are a few things you can do to keep your chain oiler in good working order:

Check the oil level regularly and add oil as needed.
Clean the oil line and oil filter regularly.
Replace the oil pump if it is not working properly.
Inspect the bar and chain regularly and replace them if necessary.

By following these tips, you can help to ensure that your Craftsman chainsaw chain oiler will continue to work properly for many years to come.

FAQs: Craftsman Chainsaw Chain Oiler Not Working

Why is my chainsaw chain oiler not working?

There are a few possible reasons why your chainsaw chain oiler might not be working. Here are some of the most common:

The oiler is clogged. If the oiler is clogged with sawdust or other debris, it won’t be able to properly lubricate the chain. To fix this, you can try cleaning the oiler with a small brush or a toothpick.
The oiler is not getting enough oil. If the oiler is not getting enough oil, it won’t be able to properly lubricate the chain. To fix this, you can try increasing the oil level in the oiler reservoir.
The oiler is not working properly. If the oiler is not working properly, it may need to be replaced. To check if the oiler is working properly, you can try starting the chainsaw and watching the oiler. If the oiler is not pumping oil, it will need to be replaced.

How do I clean the oiler on my chainsaw?

To clean the oiler on your chainsaw, you will need:

A small brush or a toothpick
A rag
Some mineral spirits or other solvent

1. Turn off the chainsaw and disconnect the spark plug wire.
2. Remove the oiler cover.
3. Use the brush or toothpick to clean out any debris that is clogging the oiler.
4. Wipe down the inside of the oiler with a rag.
5. Reattach the oiler cover.

How do I increase the oil level in the oiler on my chainsaw?

To increase the oil level in the oiler on your chainsaw, you will need:

A funnel
Some chainsaw chain oil

1. Turn off the chainsaw and disconnect the spark plug wire.
2. Remove the oiler cover.
3. Use the funnel to add oil to the oiler reservoir until the oil level is up to the full mark.
4. Reattach the oiler cover.

How do I tell if the oiler on my chainsaw is working properly?

To tell if the oiler on your chainsaw is working properly, you can try starting the chainsaw and watching the oiler. If the oiler is working properly, you should see a stream of oil coming out of the oiler nozzle. If you don’t see any oil coming out of the oiler nozzle, the oiler is not working properly and will need to be replaced.

How do I replace the oiler on my chainsaw?

To replace the oiler on your chainsaw, you will need:

A new oiler
A screwdriver
Some pliers

1. Turn off the chainsaw and disconnect the spark plug wire.
2. Remove the oiler cover.
3. Use the screwdriver to loosen the screws that hold the old oiler in place.
4. Remove the old oiler.
5. Apply a small amount of thread sealant to the threads of the new oiler.
6. Insert the new oiler into the hole in the chainsaw.
7. Use the pliers to tighten the screws that hold the new oiler in place.
8. Reattach the oiler cover.

Next Post to Read: Craftsman Chainsaw Oiler Not Working