Craftsman Electric Chainsaw Not Working

As a chainsaw repair professional, I’ve seen my fair share of craftsman electric chainsaws that aren’t working. I know how frustrating it can be when your chainsaw won’t start, and I understand the importance of quickly diagnosing and resolving the problem. That’s why I’ve put together this troubleshooting guide.

In this guide, I’ll walk you through the steps of troubleshooting a craftsman electric chainsaw that isn’t working. I’ll cover everything from simple checks like checking the power cord to more complex repairs like replacing the chainsaw chain. By the end of this guide, you’ll be able to identify and fix the problem with your chainsaw so you can get back to using it.

Most Common Reasons Of Craftsman Electric Chainsaw Not Working

1. No power

The most common reason for a Craftsman electric chainsaw not working is that there is no power to the saw. This can be caused by a number of things, including:
A loose or damaged power cord
A blown fuse
A tripped circuit breaker
A problem with the saw’s switch
To troubleshoot this issue, first check the power cord to make sure it is plugged in securely and that there are no visible signs of damage. If the power cord is okay, check the fuse and circuit breaker to make sure they are not tripped. If the fuse is blown or the circuit breaker is tripped, replace it or reset it. Finally, check the saw’s switch to make sure it is turned on.

2. Chain is too tight

Another common reason for a Craftsman electric chainsaw not working is that the chain is too tight. This can cause the saw to bind up and not run properly. To check the chain tension, first turn off the saw and disconnect the power cord. Then, use the chain tensioning lever to loosen the chain until it can move freely up and down the bar.
Once the chain is properly tensioned, reconnect the power cord and turn on the saw. The chain should now run smoothly without binding up.

3. Chain is too loose

Just as a chain that is too tight can cause problems, a chain that is too loose can also cause a Craftsman electric chainsaw not to work properly. A loose chain can come off the bar, which can be dangerous. To check the chain tension, first turn off the saw and disconnect the power cord. Then, use the chain tensioning lever to tighten the chain until it is snug against the bar.
Once the chain is properly tensioned, reconnect the power cord and turn on the saw. The chain should now run smoothly without coming off the bar.

4. Bar and chain are not aligned

If the bar and chain on a Craftsman electric chainsaw are not aligned properly, the saw will not run properly. This can be caused by a number of things, including:
A bent bar
A damaged chain
A worn-out chain guide
To check the alignment of the bar and chain, first turn off the saw and disconnect the power cord. Then, visually inspect the bar and chain to see if there are any obvious signs of damage. If the bar is bent or the chain is damaged, it will need to be replaced. If the chain guide is worn out, it will need to be replaced or repaired.
Once the bar and chain are properly aligned, reconnect the power cord and turn on the saw. The saw should now run smoothly without any problems.

5. Spark plug is bad

If the spark plug on a Craftsman electric chainsaw is bad, the saw will not run properly. This is because the spark plug is responsible for providing the spark that ignites the fuel in the engine. To check the spark plug, first turn off the saw and disconnect the power cord. Then, remove the spark plug from the engine using a spark plug wrench.
Once the spark plug is removed, visually inspect it to see if there are any signs of damage. If the spark plug is cracked, fouled, or has a damaged electrode, it will need to be replaced. If the spark plug is okay, reconnect the power cord and turn on the saw. The saw should now run smoothly without any problems.

How to Troubleshoot: Craftsman Electric Chainsaw Not Working

Your Craftsman electric chainsaw is a powerful tool that can make quick work of cutting through branches, logs, and other materials. However, like any other tool, it can occasionally malfunction. If your chainsaw is not working properly, there are a few things you can check to troubleshoot the problem.

Step 1: Check the power cord

The first thing you should do is check the power cord to make sure it is plugged in properly and that there is no damage to the cord. If the cord is damaged, you will need to replace it before you can use the chainsaw again.

Step 2: Check the battery

If your chainsaw is battery-powered, you should check the battery to make sure it is charged. If the battery is not charged, you will need to charge it before you can use the chainsaw again.

Step 3: Check the air filter

The air filter on your chainsaw helps to keep the engine clean. If the air filter is dirty, it can restrict airflow to the engine, which can cause the chainsaw to stall or not start at all. To check the air filter, remove it from the chainsaw and inspect it for dirt and debris. If the air filter is dirty, you will need to clean it or replace it.

Step 4: Check the spark plug

The spark plug is responsible for igniting the fuel in the engine. If the spark plug is fouled or damaged, it can cause the chainsaw to not start or to run poorly. To check the spark plug, remove it from the engine and inspect it for damage. If the spark plug is fouled, you will need to clean it or replace it.

Step 5: Check the carburetor

The carburetor on your chainsaw helps to mix the fuel and air in the correct proportions. If the carburetor is not adjusted properly, it can cause the chainsaw to run poorly or not start at all. To check the carburetor, you will need to remove it from the engine and adjust the carburetor according to the manufacturer’s instructions.

Step 6: Take your chainsaw to a qualified repair shop

If you have tried all of the above steps and your chainsaw is still not working, you should take it to a qualified repair shop. A qualified repair shop will be able to diagnose the problem and repair your chainsaw correctly.

Conclusion

By following these steps, you can troubleshoot a Craftsman electric chainsaw that is not working. If you are unable to fix the problem yourself, you should take your chainsaw to a qualified repair shop.

FAQs: Craftsman Electric Chainsaw Not Working

Why is my Craftsman electric chainsaw not working?

There are a few possible reasons why your Craftsman electric chainsaw may not be working. Here are some of the most common causes:

The chainsaw is not plugged in properly. Make sure that the chainsaw is plugged into an outlet that is turned on and that the plug is properly inserted into the outlet.
The chainsaw is not getting enough power. If the chainsaw is plugged into an outlet that is not providing enough power, the chainsaw may not work properly. Try plugging the chainsaw into a different outlet or try using an extension cord.
The chainsaw is overheating. If the chainsaw is overheating, it will automatically shut off to prevent damage. Allow the chainsaw to cool down before trying to use it again.
The chainsaw is out of gas. If the chainsaw is out of gas, it will not start. Make sure that the chainsaw is filled with gas before trying to start it.
The chainsaw chain is too tight or too loose. If the chainsaw chain is too tight, it will not be able to move properly and the chainsaw will not start. If the chainsaw chain is too loose, it will come off the sprocket and the chainsaw will not work properly.

How do I fix my Craftsman electric chainsaw?

If your Craftsman electric chainsaw is not working, there are a few things you can check to try to fix the problem. Here are some troubleshooting tips:

Check the power cord. Make sure that the power cord is plugged into an outlet that is turned on and that the plug is properly inserted into the outlet.
Check the spark plug. Remove the spark plug and check to see if it is dirty or damaged. If the spark plug is dirty, clean it with a wire brush. If the spark plug is damaged, replace it with a new one.
Check the air filter. Remove the air filter and check to see if it is dirty or damaged. If the air filter is dirty, clean it with a dry cloth. If the air filter is damaged, replace it with a new one.
Check the carburetor. If the chainsaw is still not working after you have checked the power cord, spark plug, and air filter, you may need to clean the carburetor.

How do I prevent my Craftsman electric chainsaw from not working?

There are a few things you can do to prevent your Craftsman electric chainsaw from not working:

Store the chainsaw in a cool, dry place. If the chainsaw is stored in a warm, humid environment, it is more likely to develop problems.
Keep the chainsaw clean and well-maintained. Make sure to clean the chainsaw after each use and to replace the spark plug and air filter regularly.
Do not overload the chainsaw. The chainsaw is designed to cut through wood of a certain thickness. If you try to cut through wood that is too thick, the chainsaw may overheat and damage the engine.
Use the correct oil. Make sure to use the correct oil for your chainsaw. Using the wrong oil can damage the engine.

What should I do if my Craftsman electric chainsaw is still not working?

If you have tried all of the troubleshooting tips and your Craftsman electric chainsaw is still not working, you may need to take it to a qualified technician for repair.

Where can I buy a replacement Craftsman electric chainsaw chain?

You can buy a replacement Craftsman electric chainsaw chain at most home improvement stores or online retailers.

Next Post You May Like: Craftsman Incredi-Pull 55Cc Chainsaw Chain Oiler Not Working