If your Craftsman pressure washer clean and carry pump isn’t working, you’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, there’s a good chance you can fix it yourself with a little troubleshooting.
In this guide, I’ll walk you through the steps to diagnose and fix the problem. I’ll also provide some tips on how to prevent future problems. So if your Craftsman pressure washer clean and carry pump isn’t working, read on for help!
Why Craftsman Pressure Washer Clean And Carry Pump Not Working
Craftsman Pressure Washer Clean And Carry Pump Not Working
Dirty filter:
The most common reason for a pressure washer pump not working is a dirty filter. The filter prevents dirt and debris from entering the pump, and if it becomes clogged, it can restrict the flow of water and cause the pump to overheat. To check the filter, remove it from the pump and clean it with a brush or compressed air.
Low water pressure:
If the water pressure at the outlet of the pressure washer is low, it may be due to a problem with the pump or the water supply. To check the pump, turn on the pressure washer and listen for the sound of the pump running. If the pump is not running, it may be defective and need to be replaced. To check the water supply, make sure that the water hose is connected to the pressure washer and that the water is turned on.
Clogged nozzle:
A clogged nozzle can also cause the pressure washer to not work properly. To check the nozzle, remove it from the gun and clean it with a brush or compressed air.
Damaged pump:
If the pump is damaged, it will not be able to generate enough pressure to power the pressure washer. To check the pump, turn on the pressure washer and listen for the sound of the pump running. If the pump is not running, it may be defective and need to be replaced.
Bad electrical connection:
If the electrical connection to the pressure washer is loose or damaged, it can prevent the pump from working properly. To check the electrical connection, make sure that the plug is firmly inserted into the outlet and that there is no damage to the cord.
Incorrect oil level:
Some pressure washers require oil to lubricate the pump. If the oil level is low, it can cause the pump to overheat and fail. To check the oil level, refer to the owner’s manual for your pressure washer.
How to Troubleshoot: Craftsman Pressure Washer Clean and Carry Pump Not Working
Check the Power Source
If your Craftsman pressure washer clean and carry pump is not working
the first step is to check the power source. Ensure that the power cord is properly connected to a working power outlet. If the power source is not the issue
move on to the next troubleshooting step.
Inspect the Water Supply
Next
inspect the water supply to the pressure washer. Make sure that the water supply is turned on and that there are no kinks or blockages in the hose. Additionally
check the inlet filter for any debris that may be obstructing water flow. A clogged inlet filter can cause the pump to malfunction.
Examine the High-Pressure Hose
Examine the high-pressure hose for any signs of damage or leaks. A damaged hose can result in a loss of pressure and lead to the pump not working efficiently. If you notice any issues with the hose
it may need to be repaired or replaced.
Check the Nozzle and Spray Gun
Inspect the nozzle and spray gun for any blockages or damage. A clogged or damaged nozzle can affect the pressure washer’s performance. Clean the nozzle and spray gun thoroughly to ensure proper water flow.
Inspect the Pump
If the above steps do not resolve the issue
it’s time to inspect the pump itself. Check for any visible signs of damage or wear. Additionally
check the pump oil level and top it up if necessary. Low pump oil can cause the pump to malfunction.
Professional Assistance
If you have gone through the troubleshooting steps and the Craftsman pressure washer clean and carry pump is still not working
it may be time to seek professional assistance. A certified technician can diagnose and repair any underlying issues with the pump to get your pressure washer back in working order.
By following these troubleshooting steps
you can effectively address issues with the Craftsman pressure washer clean and carry pump and ensure that it operates at its optimal performance.
Also Read: Craftsman Pressure Washer Sopdipenser Not Working
FAQs: Craftsman Pressure Washer Clean and Carry Pump Not Working
Why is my Craftsman pressure washer clean and carry pump not working?
There are a few possible reasons why your Craftsman pressure washer clean and carry pump may not be working.
The pump may be clogged: Check the pump inlet and outlet screens for any debris that may be blocking the flow of water. If the screens are clogged, clean them with a soft brush and warm water.
The pump may be damaged: If the pump is making a loud noise or is leaking water, it may be damaged and will need to be replaced.
The pump may not be getting enough power: Make sure that the pump is plugged into an outlet that is providing the correct voltage. If the outlet is not providing enough power, the pump will not be able to operate properly.
The pump may be out of water: Make sure that the pump reservoir is filled with water. If the reservoir is empty, the pump will not be able to operate.
How do I fix a clogged Craftsman pressure washer clean and carry pump?
To fix a clogged Craftsman pressure washer clean and carry pump, follow these steps:
1. Turn off the pressure washer and unplug it from the outlet.
2. Remove the pump cover.
3. Remove the inlet and outlet screens.
4. Clean the screens with a soft brush and warm water.
5. Reattach the screens to the pump.
6. Replace the pump cover.
7. Turn on the pressure washer and test the pump.
How do I know if my Craftsman pressure washer clean and carry pump is damaged?
There are a few signs that your Craftsman pressure washer clean and carry pump may be damaged.
The pump is making a loud noise: This could be a sign that the pump bearings are worn out or that the impeller is damaged.
The pump is leaking water: This could be a sign that the seals are worn out or that the pump housing is cracked.
The pump is not generating enough pressure: This could be a sign that the pump is not working properly.
If you notice any of these signs, it is best to have the pump inspected by a qualified technician.
How do I make sure my Craftsman pressure washer clean and carry pump is getting enough power?
To make sure your Craftsman pressure washer clean and carry pump is getting enough power, follow these steps:
1. Make sure that the pump is plugged into an outlet that is providing the correct voltage.
2. Check the power cord for any damage. If the power cord is damaged, replace it with a new one.
3. Check the outlet for any problems. If the outlet is not working properly, have it repaired or replaced.
What do I do if my Craftsman pressure washer clean and carry pump is out of water?
If your Craftsman pressure washer clean and carry pump is out of water, follow these steps:
1. Turn off the pressure washer and unplug it from the outlet.
2. Remove the pump cover.
3. Fill the pump reservoir with water.
4. Reattach the pump cover.
5. Turn on the pressure washer and test the pump.
