Your Greenworks 1700 PSI pressure washer is a powerful tool that can make quick work of cleaning your home, car, and outdoor furniture. But what happens when the soap dispenser stops working This is a common problem that can be frustrating and inconvenient. But don’t worry, you can usually fix it yourself with a few simple steps.
In this guide, I’ll walk you through the process of troubleshooting a Greenworks 1700 PSI pressure washer soap dispenser that’s not working. I’ll cover the most common causes of the problem and provide step-by-step instructions on how to fix them. By the end of this guide, you’ll be able to get your pressure washer back up and running in no time.
Why Greenworks Pressure Washer 1700 Psi Soap Dispenser Not Working
Nozzle Clogged
The soap nozzle may be clogged with soap or debris, preventing the soap from flowing out.
To clear the clog, try using a needle or other sharp object to poke through the nozzle.
If the clog is severe, you may need to remove the nozzle and soak it in a cleaning solution.
Soap Tank Empty
If the soap tank is empty, the soap dispenser will not work.
Make sure the soap tank is filled with soap before using the soap dispenser.
Soap Tank Blocked
The soap tank may be blocked by a kink in the hose or a clog in the inlet valve.
To check for a kink in the hose, disconnect the hose from the soap tank and inspect it for any kinks.
To check for a clog in the inlet valve, remove the inlet valve from the soap tank and inspect it for any debris.
Soap Dispenser Not Aligned
The soap dispenser may not be aligned properly with the spray gun, preventing the soap from flowing out.
To align the soap dispenser, turn the soap dispenser until it is parallel to the spray gun.
Soap Dispenser Switch Defective
The soap dispenser switch may be defective, preventing the soap from flowing out.
To check the soap dispenser switch, turn the switch on and off.
If the switch does not work, you may need to replace it.
How to Troubleshoot: Greenworks Pressure Washer 1700 PSI Soap Dispenser Not Working
Symptoms
If your Greenworks pressure washer 1700 PSI soap dispenser is not working, there are a few possible causes.
The soap dispenser may be clogged.
The soap dispenser may not be getting enough water.
The soap dispenser may be turned off.
The soap dispenser may be broken.
Troubleshooting
To troubleshoot the problem, follow these steps:
1. Check the soap dispenser for clogs:
Remove the soap dispenser from the pressure washer and inspect it for any clogs. If you find any clogs, remove them using a small brush or a toothpick.
2. Check the water supply to the soap dispenser:
Make sure that the water hose is connected to the pressure washer and that the water is turned on.3. Turn on the soap dispenser:
Press the button on the soap dispenser to turn it on. If the soap dispenser does not turn on, check the fuse or circuit breaker to make sure that it is not tripped.
4. Inspect the soap dispenser for damage:
If the soap dispenser is damaged, it will need to be replaced.
Prevention
To prevent your Greenworks pressure washer 1700 PSI soap dispenser from malfunctioning, follow these tips:
Clean the soap dispenser regularly to prevent clogs.
Make sure that the water supply to the soap dispenser is always turned on.
Turn off the soap dispenser when you are not using it.
Store the soap dispenser in a safe place when you are not using it.
Conclusion
If you have tried troubleshooting the problem and your Greenworks pressure washer 1700 PSI soap dispenser is still not working, you may need to contact a qualified technician for help.
Also Read: Greenworks Pressure Washer 1800 Soap Not Working
FAQs: Greenworks Pressure Washer 1700 PSI Soap Dispenser Not Working
Why is my Greenworks pressure washer soap dispenser not working?
There are a few possible reasons why your Greenworks pressure washer soap dispenser might not be working. Here are some of the most common causes:
The soap dispenser is clogged: This is the most common cause of a soap dispenser not working. To fix this, try cleaning the soap dispenser with a degreaser or a vinegar and water solution.
The soap dispenser is not getting enough water: Make sure that the water hose is connected to the soap dispenser and that the water is turned on.
The soap dispenser is not getting enough pressure: If the pressure washer is not generating enough pressure, the soap will not be able to flow out of the dispenser. Check the pressure washer’s oil level and make sure that it is properly maintained.
The soap dispenser is not turned on: Make sure that the soap dispenser is turned on. This is usually a small switch on the side of the dispenser.
How do I fix a clogged Greenworks pressure washer soap dispenser?
To fix a clogged Greenworks pressure washer soap dispenser, you can try the following steps:
1. Turn off the pressure washer and disconnect the water hose.
2. Remove the soap dispenser from the pressure washer.
3. Use a degreaser or a vinegar and water solution to clean the inside of the soap dispenser.
4. Reassemble the soap dispenser and reconnect the water hose.
5. Turn on the pressure washer and test the soap dispenser.
How do I make sure my Greenworks pressure washer soap dispenser is getting enough water?
To make sure your Greenworks pressure washer soap dispenser is getting enough water, you can do the following:
1. Make sure that the water hose is connected to the soap dispenser and that the water is turned on.
2. Check the pressure washer’s oil level and make sure that it is properly maintained.
3. If the pressure washer is not generating enough pressure, you can try adjusting the pressure regulator.
How do I increase the pressure of my Greenworks pressure washer soap dispenser?
To increase the pressure of your Greenworks pressure washer soap dispenser, you can do the following:
1. Check the pressure washer’s oil level and make sure that it is properly maintained.
2. Adjust the pressure regulator.
3. If the pressure washer is still not generating enough pressure, you may need to replace the pump.
How do I turn on the soap dispenser on my Greenworks pressure washer?
To turn on the soap dispenser on your Greenworks pressure washer, you can do the following:
1. Find the soap dispenser switch on the side of the pressure washer.
2. Turn the switch to the on position.
3. The soap dispenser will now be turned on.
