Earthwise Chainsaw Oiler Not Working

As a chainsaw owner, there are few things more frustrating than having your oiler stop working. Not only can it lead to damage to your chainsaw, but it can also be a major inconvenience. If your Earthwise chainsaw oiler is not working, you may be wondering what to do. This guide will help you troubleshoot the issue and get your chainsaw back up and running in no time.

We understand that this can be a frustrating issue, so we’ve put together this guide to help you quickly diagnose and resolve the problem. By the end of this guide, you’ll be able to get your chainsaw oiler working again so you can get back to enjoying your outdoor adventures.

Most Common Reasons Of Earthwise Chainsaw Oiler Not Working

1. Oiler Pump Not Working

The most common reason for an Earthwise chainsaw oiler not working is a faulty oiler pump. This can be caused by a number of things, including:

A clogged oil line: The oil line can become clogged with sawdust or other debris, preventing the oil from reaching the chain.
A broken oil pump: The oil pump can break down, preventing it from pumping oil to the chain.
A faulty oil filter: The oil filter can become clogged, preventing the oil from flowing through the system.

2. Oil Level Too Low

Another common reason for an Earthwise chainsaw oiler not working is that the oil level is too low. This can be caused by:

Not adding enough oil to the chainsaw: If you don’t add enough oil to the chainsaw, the oil level will eventually become too low to lubricate the chain properly.
An oil leak: If there is an oil leak, the oil level will eventually become too low to lubricate the chain properly.

3. Oil Hose Kinked or Damaged

The oil hose can become kinked or damaged, preventing the oil from flowing from the oil tank to the chain. This can be caused by:

Bumping or dropping the chainsaw: If you bump or drop the chainsaw, the oil hose can become kinked or damaged.
Running the chainsaw over rough terrain: If you run the chainsaw over rough terrain, the oil hose can become kinked or damaged.

4. Oiler Switch Not Engaged

The oiler switch can be turned off, preventing the oil from flowing to the chain. This can be caused by:

Accidentally turning off the oiler switch: If you accidentally turn off the oiler switch, the oil will not flow to the chain.
The oiler switch being stuck in the off position: If the oiler switch is stuck in the off position, the oil will not flow to the chain.

How to Troubleshoot: Earthwise Chainsaw Oiler Not Working

Symptoms of a Chainsaw Oiler Not Working

There are a few different symptoms that can indicate that your chainsaw oiler is not working properly. These include:

The chainsaw is running hot, even when it is not under load.
The chainsaw chain is smoking or sparking.
The chainsaw chain is not staying sharp.
The chainsaw chain is skipping or jumping.
The chainsaw is making a loud noise.

If you are experiencing any of these symptoms, it is important to troubleshoot the problem and fix it as soon as possible. A chainsaw that is not properly oiled can quickly overheat and damage the engine.

Troubleshooting a Chainsaw Oiler

To troubleshoot a chainsaw oiler, you will need to:

1. Check the oil level.
2. Check the oil pump.
3. Check the oil line.
4. Check the oil filter.
5. Check the chainsaw chain.

1. Check the oil level.

The first thing you should do is check the oil level in the chainsaw. To do this, locate the oil tank on the chainsaw and remove the oil cap. The oil level should be between the full and add marks on the oil tank. If the oil level is low, add more oil to the tank.

2. Check the oil pump.

The oil pump is responsible for sending oil to the chainsaw chain. To check the oil pump, start the chainsaw and let it run for a few minutes. Then, look at the oil line that runs from the oil pump to the chainsaw chain. The oil line should be dripping oil onto the chain. If the oil line is not dripping oil, the oil pump may be faulty.

3. Check the oil line.

The oil line is a hose that connects the oil pump to the chainsaw chain. To check the oil line, inspect it for leaks. If you find a leak, you will need to replace the oil line.

4. Check the oil filter.

The oil filter traps dirt and debris from the oil. To check the oil filter, remove the oil filter from the chainsaw and inspect it for dirt and debris. If the oil filter is dirty, you will need to replace it.

5. Check the chainsaw chain.

The chainsaw chain is the part of the chainsaw that actually cuts the wood. To check the chainsaw chain, inspect it for damage. If the chainsaw chain is damaged, you will need to replace it.

Fixing a Chainsaw Oiler

Once you have identified the problem with your chainsaw oiler, you can fix it. Here are the steps to fix a chainsaw oiler:

1. Replace the oil. If the oil level is low, add more oil to the tank.
2. Replace the oil pump. If the oil pump is faulty, replace it with a new oil pump.
3. Replace the oil line. If the oil line is leaking, replace it with a new oil line.
4. Replace the oil filter. If the oil filter is dirty, replace it with a new oil filter.
5. Replace the chainsaw chain. If the chainsaw chain is damaged, replace it with a new chainsaw chain.

By following these steps, you can fix a chainsaw oiler and keep your chainsaw running smoothly.

FAQs: Earthwise Chainsaw Oiler Not Working

Why is my Earthwise chainsaw oiler not working?

There are a few possible reasons why your Earthwise chainsaw oiler may not be working. Here are some of the most common causes:

The oiler is not properly installed. Make sure that the oiler is installed correctly according to the instructions. The oiler should be screwed onto the bar oiler port on the chainsaw.
The oiler is clogged. If the oiler is clogged, it will not be able to pump oil to the chainsaw. To clean the oiler, remove the oiler from the chainsaw and soak it in a cleaning solution. Then, rinse the oiler with warm water and dry it thoroughly.
The oiler is not getting enough oil. If the oiler is not getting enough oil, it will not be able to pump oil to the chainsaw. Make sure that the oiler is filled with oil and that the oil level is above the minimum level.
The chainsaw is not getting enough air. If the chainsaw is not getting enough air, it will not be able to draw oil from the oiler. Make sure that the chainsaw is not clogged with sawdust or debris.
The chainsaw is not running properly. If the chainsaw is not running properly, it will not be able to draw oil from the oiler. Make sure that the chainsaw is properly adjusted and that the spark plug is firing.

How do I fix my Earthwise chainsaw oiler?

If your Earthwise chainsaw oiler is not working, you can try the following troubleshooting steps:

1. Check the oiler installation. Make sure that the oiler is installed correctly according to the instructions.
2. Clean the oiler. If the oiler is clogged, it will not be able to pump oil to the chainsaw. To clean the oiler, remove the oiler from the chainsaw and soak it in a cleaning solution. Then, rinse the oiler with warm water and dry it thoroughly.
3. Fill the oiler with oil. Make sure that the oiler is filled with oil and that the oil level is above the minimum level.
4. Check the air intake. Make sure that the chainsaw is not clogged with sawdust or debris.
5. Adjust the chainsaw. Make sure that the chainsaw is properly adjusted and that the spark plug is firing.

If you have tried these troubleshooting steps and your Earthwise chainsaw oiler is still not working, you may need to contact a qualified technician for help.

What are the symptoms of a bad chainsaw oiler?

There are a few symptoms that may indicate that your Earthwise chainsaw oiler is bad. These include:

The chainsaw is not getting enough oil.
The chainsaw is running hot.
The chainsaw is smoking.
The chainsaw is making a loud noise.
The chainsaw is not cutting properly.

If you notice any of these symptoms, you should have your chainsaw oiler checked by a qualified technician.

How often should I clean my Earthwise chainsaw oiler?

You should clean your Earthwise chainsaw oiler every time you change the oil in your chainsaw. This will help to prevent the oiler from becoming clogged and will ensure that it is working properly.

Where can I buy a replacement Earthwise chainsaw oiler?

You can purchase a replacement Earthwise chainsaw oiler from a variety of retailers, including online retailers and hardware stores. You can also contact Earthwise directly to purchase a replacement oiler.

Next Post You May Like: Echo 370 Chainsaw Chain Tensioner Not Working