Do you have an Ex-Cell 2100 PSI pressure washer that isn’t dispensing soap If so, you’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, there’s a simple solution. In this guide, I’ll walk you through the steps to troubleshoot the issue and get your pressure washer soaping again in no time.
First, let’s talk about why your pressure washer might not be dispensing soap. There are a few possible causes, including
The soap reservoir is empty. This is the most common cause of the problem. Make sure the soap reservoir is full before you start using your pressure washer.
The soap injector is clogged. The soap injector is a small tube that connects the soap reservoir to the spray gun. If it’s clogged, it can prevent the soap from flowing out of the gun.
The soap pressure is too low. The soap pressure is the pressure at which the soap is dispensed from the gun. If the pressure is too low, the soap won’t be able to reach the surface you’re cleaning.
Once you’ve identified the cause of the problem, you can follow the steps in this guide to fix it. So let’s get started!
Why Ex-Cell 2100 Psi Pressure Washer Soap Not Working
Reasons Why Ex-Cell 2100 Psi Pressure Washer Soap Not Working
Incorrect soap:
The soap you are using may not be compatible with your pressure washer. Make sure to use a soap that is specifically designed for pressure washers.
Incorrect dilution:
The soap you are using may be too concentrated or too diluted. The manufacturer’s instructions will specify the correct dilution ratio.
Dirty soap tank:
The soap tank may be dirty, which can prevent the soap from being properly dispensed. Clean the soap tank regularly to prevent this problem.
Clogged nozzle:
The nozzle may be clogged, which can prevent the soap from being properly sprayed. Clean the nozzle regularly to prevent this problem.
Low pressure:
The pressure washer may not be producing enough pressure to properly spray the soap. Check the pressure washer to make sure it is working properly.
How to Troubleshoot: Ex-Cell 2100 PSI Pressure Washer Soap Not Working
Symptoms
There are a few different symptoms that can indicate that your Ex-Cell 2100 PSI pressure washer soap is not working properly. These include:
The soap does not come out of the wand when you press the trigger.
The soap comes out of the wand in a weak or inconsistent stream.
The soap is not foaming properly.
The soap is leaving streaks on your surfaces.
Troubleshooting
If you are experiencing any of the symptoms listed above, there are a few things you can check to troubleshoot the problem.
1. Check the soap reservoir:
Make sure that the soap reservoir is full and that the soap is flowing freely into the wand. If the reservoir is empty, fill it up with soap and try again. If the soap is not flowing freely, you may need to clean the reservoir or replace the filter.
2. Check the wand:
Make sure that the wand is not clogged. You can do this by removing the wand from the pressure washer and inspecting it for any obstructions. If the wand is clogged, you can try to clear it by using a pipe cleaner or a small brush.
3. Check the pressure washer:
Make sure that the pressure washer is turned on and that the pressure is set correctly. If the pressure is too low, the soap will not come out of the wand properly.
4. Check the soap:
Make sure that you are using the correct type of soap for your pressure washer. Some soaps are designed for specific types of surfaces, and using the wrong type of soap can cause problems.
5. Contact customer support:
If you have tried all of the above troubleshooting steps and you are still having problems, you can contact Ex-Cell customer support for help.
Preventative Maintenance
To help prevent problems with your Ex-Cell 2100 PSI pressure washer soap, you can follow these tips:
Keep the soap reservoir full.
Clean the soap reservoir and filter regularly.
Check the wand for clogs regularly.
Use the correct type of soap for your pressure washer.
Contact customer support if you have any questions or problems.
By following these tips, you can help keep your Ex-Cell 2100 PSI pressure washer soap working properly and prevent problems.
Also Read: Exg 2300 Electric Pressure Washer Not Working
FAQs: Ex-Cell 2100 PSI Pressure Washer Soap Not Working
Why isn’t my Ex-Cell 2100 PSI pressure washer soap working?
There are a few possible reasons why your Ex-Cell 2100 PSI pressure washer soap might not be working. Here are some of the most common:
The soap is not compatible with your pressure washer: Make sure that the soap you are using is specifically designed for use with pressure washers. Some soaps are designed for use with cold water, while others are designed for use with hot water. If you are using the wrong type of soap, it will not work properly.
The soap is not being applied correctly: Make sure that you are applying the soap to the surface in a thin, even layer. If you apply too much soap, it will not be able to rinse off properly.
The soap is not being rinsed off properly: After you have applied the soap, you need to rinse it off thoroughly with water. If you do not rinse the soap off properly, it will leave a residue on the surface that can damage your paint or other surfaces.
The pressure washer is not working properly: If your pressure washer is not generating enough pressure, it will not be able to spray the soap off the surface properly. Make sure that your pressure washer is in good working order and that the nozzle is clean.
How do I fix my Ex-Cell 2100 PSI pressure washer soap not working?
If your Ex-Cell 2100 PSI pressure washer soap is not working, here are a few things you can try:
Check the compatibility of the soap: Make sure that the soap you are using is specifically designed for use with pressure washers.
Check the application method: Make sure that you are applying the soap to the surface in a thin, even layer.
Check the rinsing method: Make sure that you are rinsing the soap off thoroughly with water.
Check the pressure washer: Make sure that your pressure washer is in good working order and that the nozzle is clean.
If you have tried all of these things and your pressure washer soap is still not working, you may need to contact the manufacturer for help.
What kind of soap should I use with my Ex-Cell 2100 PSI pressure washer?
You should use a soap that is specifically designed for use with pressure washers. Some soaps are designed for use with cold water, while others are designed for use with hot water. Make sure that you choose a soap that is compatible with your pressure washer.
Here are a few recommendations for soaps that you can use with your Ex-Cell 2100 PSI pressure washer:
Ex-Cell Pressure Washer Soap This soap is specifically designed for use with Ex-Cell pressure washers. It is available in both cold water and hot water formulas.
CarPro Reset This soap is a good choice for cleaning cars, trucks, and other vehicles. It is biodegradable and safe for use on all surfaces.
Simple Green All-Purpose Cleaner This cleaner is a good choice for cleaning a variety of surfaces, including concrete, siding, and decks. It is also biodegradable and safe for use on all surfaces.
How do I apply soap to my Ex-Cell 2100 PSI pressure washer?
To apply soap to your Ex-Cell 2100 PSI pressure washer, follow these steps:
1. Turn on the pressure washer and allow it to reach full pressure.
2. Attach the soap bottle to the pressure washer.
3. Squeeze the trigger on the soap bottle to dispense the soap onto the surface.
4. Move the pressure washer back and forth over the surface to evenly apply the soap.
5. Rinse the surface thoroughly with water to remove the soap.
How do I rinse soap off my Ex-Cell 2100 PSI pressure washer?
To rinse soap off your Ex-Cell 2100 PSI pressure washer, follow these steps:
1. Turn on the pressure washer and allow it to reach full pressure.
2. Attach the garden hose to the pressure washer.
3. Turn on the garden hose and direct the water at the surface.
4. Move the pressure washer back and forth over the surface to rinse off the soap.
5. Continue rinsing until all of the soap is removed.
