Homelite 2.7 Chainsaw Oiler Not Working

As a chainsaw owner, there are few things more frustrating than having your saw not work properly. One of the most common problems that can occur is when the oiler stops working. This can be a major inconvenience, as it can lead to damage to your saw and the wood you are cutting.

In this guide, I will walk you through the steps to troubleshoot a Homelite 2.7 chainsaw oiler that is not working. I will explain the different causes of this problem and how to fix them. By the end of this guide, you will be able to quickly diagnose and resolve the issue, so you can get back to using your saw.

Most Common Reasons Of Homelite 2.7 Chainsaw Oiler Not Working

Most Common Reasons Of Homelite 2.7 Chainsaw Oiler Not Working

1. Oiler Hose Clogged

The most common reason for a Homelite 2.7 chainsaw oiler not working is a clogged oiler hose. This can be caused by dirt, sawdust, or other debris getting into the hose and blocking the flow of oil. To fix this problem, you will need to remove the oiler hose from the chainsaw and clean it thoroughly.

2. Oiler Pump Not Working

If the oiler hose is not clogged, the next thing to check is the oiler pump. The oiler pump is responsible for pumping oil from the reservoir to the chain. If the pump is not working, it will not be able to deliver oil to the chain, and the chainsaw will not be lubricated properly. To check the oiler pump, you will need to remove the oiler cover and look at the pump. If the pump is not moving, it will need to be replaced.

3. Oiler Reservoir Empty

Another common reason for a Homelite 2.7 chainsaw oiler not working is an empty oiler reservoir. If the reservoir is empty, the oiler will not be able to pump oil to the chain. To fix this problem, you will need to add oil to the reservoir.

4. Oiler O-Ring Damaged

The oiler O-ring is a small rubber ring that seals the oiler pump. If the O-ring is damaged, it will not be able to create a seal, and oil will leak out of the pump. To fix this problem, you will need to replace the O-ring.

5. Oiler Hose Kinked

If the oiler hose is kinked, it will restrict the flow of oil to the chain. To fix this problem, you will need to straighten out the hose.

How to Troubleshoot: Homelite 2.7 Chainsaw Oiler Not Working

Symptoms

There are a few different symptoms that you may experience if your Homelite 2.7 chainsaw oiler is not working properly. These include:

The chainsaw chain is not being lubricated properly, which can lead to overheating and damage to the chain and bar.
The oiler is making a strange noise, such as a whining or buzzing sound.
The oiler is leaking oil, which can be a fire hazard.
The oiler is not turning on at all.

Causes

There are a number of different things that can cause a Homelite 2.7 chainsaw oiler to stop working properly. These include:

A clogged oil filter.
A dirty oil tank.
A faulty oil pump.
A broken oil line.
A bad oiler switch.

Troubleshooting

If you are experiencing any of the symptoms listed above, you can try troubleshooting the problem yourself. Here are a few steps to follow:

1. Check the oil filter. If the oil filter is clogged, it will prevent oil from flowing to the chain. To check the oil filter, remove it from the chainsaw and inspect it for dirt or debris. If the filter is clogged, clean it or replace it with a new one.
2. Check the oil tank. If the oil tank is dirty, it can also prevent oil from flowing to the chain. To check the oil tank, remove the cap and inspect the inside of the tank for dirt or debris. If the tank is dirty, clean it with a rag or brush.
3. Check the oil pump. The oil pump is responsible for pumping oil from the tank to the chain. If the oil pump is faulty, it will not be able to pump oil to the chain. To check the oil pump, remove the oil line from the pump and turn the chainsaw on. If oil does not flow from the oil line, the oil pump is faulty and will need to be replaced.
4. Check the oil line. The oil line is responsible for transporting oil from the pump to the chain. If the oil line is broken, it will prevent oil from flowing to the chain. To check the oil line, inspect it for cracks or leaks. If the oil line is damaged, it will need to be replaced.
5. Check the oiler switch. The oiler switch is responsible for turning the oiler on and off. If the oiler switch is bad, it will not be able to turn the oiler on. To check the oiler switch, turn the chainsaw on and look for the oiler switch. If the oiler switch is not turning on, it will need to be replaced.

Prevention

The best way to prevent problems with your Homelite 2.7 chainsaw oiler is to keep it clean and well-maintained. Here are a few tips to help you prevent problems:

Change the oil filter regularly.
Clean the oil tank regularly.
Check the oil pump and oil line regularly for leaks or damage.
Replace the oiler switch if it is not working properly.

By following these tips, you can help keep your Homelite 2.7 chainsaw oiler running smoothly and efficiently.

FAQs: Homelite 2.7 Chainsaw Oiler Not Working

Why is my Homelite 2.7 chainsaw oiler not working?

There are a few possible reasons why your Homelite 2.7 chainsaw oiler may not be working.

The oiler may be clogged. If the oiler is clogged, it will not be able to properly deliver oil to the chain. To clean the oiler, remove the oiler cover and clean the inside of the oiler with a clean cloth.
The oiler may be empty. If the oiler is empty, it will not be able to deliver oil to the chain. To check the oil level, remove the oiler cover and look inside the oiler. If the oil level is low, add oil to the oiler until it reaches the fill line.
The oiler may be defective. If the oiler is defective, it will not be able to properly deliver oil to the chain. If you suspect that the oiler is defective, you should contact Homelite customer service for assistance.

How do I fix a clogged Homelite 2.7 chainsaw oiler?

To fix a clogged Homelite 2.7 chainsaw oiler, you will need to clean the oiler. To do this, follow these steps:

1. Remove the oiler cover.
2. Use a clean cloth to wipe the inside of the oiler.
3. Reinstall the oiler cover.

How do I check the oil level in my Homelite 2.7 chainsaw oiler?

To check the oil level in your Homelite 2.7 chainsaw oiler, you will need to remove the oiler cover. The oil level should be between the full and add marks on the oiler. If the oil level is low, add oil to the oiler until it reaches the full mark.

How do I replace the oiler on my Homelite 2.7 chainsaw?

To replace the oiler on your Homelite 2.7 chainsaw, you will need to follow these steps:

1. Remove the old oiler.
2. Install the new oiler.
3. Add oil to the oiler.

How often should I oil my Homelite 2.7 chainsaw?

You should oil your Homelite 2.7 chainsaw every time you use it. To oil the chainsaw, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the oiler cover.
3. Add oil to the oiler until it reaches the full mark.
4. Reinstall the oiler cover.

Next Post You May Like: Homelite Chainsaw 2.0 Chain Oiler Not Working