Husqvarna Chainsaw 455 Rancher Chain Oiler Not Working

The Husqvarna 455 Rancher is a popular chainsaw for homeowners and professionals alike. However, one common issue that can occur with this saw is a malfunctioning chain oiler. This can be a frustrating and inconvenient problem, as it can lead to the chain becoming dull and difficult to use. Additionally, a lack of chain oil can damage the saw’s bar and chain.

In this troubleshooting guide, I will walk you through the steps to diagnose and resolve the issue of a Husqvarna 455 Rancher chain oiler not working. By following these steps, you can quickly and easily restore your saw to full functionality.

Most Common Reasons Of Husqvarna Chainsaw 455 Rancher Chain Oiler Not Working

1. Oiler Hose Is Clogged

The most common reason for a chainsaw chain oiler not working is a clogged oiler hose. This can happen if the hose becomes kinked or pinched, or if sawdust or other debris builds up inside the hose. To fix this problem, you will need to remove the oiler hose from the chainsaw and clean it out. You can do this by using a small brush or a piece of wire.

2. Oiler Pump Is Not Working

Another common cause of a chainsaw chain oiler not working is a faulty oiler pump. The oiler pump is responsible for pumping oil from the reservoir to the chain. If the pump is not working properly, it will not be able to deliver oil to the chain. To check if the oiler pump is working, you can listen for a faint whirring sound when you start the chainsaw. If you do not hear this sound, the oiler pump may be faulty and will need to be replaced.

3. Oiler Reservoir Is Empty

A third possible cause of a chainsaw chain oiler not working is an empty oiler reservoir. If the reservoir is empty, the oiler will not be able to deliver oil to the chain. To check if the oiler reservoir is empty, you can look inside the reservoir. If you do not see any oil, the reservoir will need to be filled.

4. Oiler Filter Is Clogged

Finally, a clogged oiler filter can also prevent the oiler from working properly. The oiler filter is located between the oiler pump and the chain. It helps to keep dirt and debris from entering the oiler pump. If the filter becomes clogged, it will restrict the flow of oil to the chain. To check if the oiler filter is clogged, you can remove it from the chainsaw and inspect it. If the filter is clogged, you will need to clean it or replace it.

How to Troubleshoot: Husqvarna Chainsaw 455 Rancher Chain Oiler Not Working

Symptoms of a Chain Oiler Not Working

There are a few symptoms that can indicate that the chain oiler on your Husqvarna chainsaw 455 Rancher is not working properly. These include:

The chain is not being lubricated properly, which can lead to overheating and damage to the chain.
The chain is leaving a trail of oil behind it as it cuts through wood.
The oil reservoir is empty or nearly empty.
The oiler is making a strange noise.

Troubleshooting a Chain Oiler Not Working

If you are experiencing any of the symptoms listed above, you can try troubleshooting the chain oiler yourself. Here are a few things to check:

Make sure that the oil reservoir is full. The oil reservoir is located on the side of the chainsaw, near the chain bar. To check the oil level, remove the cap and look inside. The oil level should be between the full and add oil marks. If the oil level is low, add more oil to the reservoir.
Check the oil filter. The oil filter is located inside the oil tank. To check the oil filter, remove the oil tank cap and look inside. The oil filter is a small, cylindrical object with a black mesh screen. If the oil filter is dirty or clogged, remove it and clean it with a clean rag. You can also replace the oil filter with a new one.
Check the oil line. The oil line is a small hose that connects the oil tank to the chain bar. To check the oil line, follow the oil line from the oil tank to the chain bar. Look for any leaks or kinks in the line. If you find a leak, repair or replace the oil line. If you find a kink in the line, straighten out the line.
Check the oil pump. The oil pump is a small, electric motor that pumps oil from the oil tank to the chain bar. To check the oil pump, turn on the chainsaw and listen for the oil pump to start. You should hear a faint whirring sound. If you do not hear the oil pump, the oil pump may be defective. You will need to replace the oil pump.

Preventing Chain Oiler Problems

The best way to prevent chain oiler problems is to maintain your chainsaw regularly. Here are a few things you can do to help prevent chain oiler problems:

Keep the oil reservoir full. Make sure that the oil reservoir is always full. This will help to ensure that the chain is properly lubricated and that the oil pump does not have to work as hard.
Change the oil filter regularly. The oil filter should be changed every 25 hours of operation. This will help to keep the oil line clean and free of debris.
Inspect the oil line regularly. Inspect the oil line for leaks or kinks every 25 hours of operation. If you find a leak or kink, repair or replace the oil line.
Clean the oil pump regularly. The oil pump should be cleaned every 50 hours of operation. This will help to keep the oil pump running smoothly and prevent it from becoming clogged.

By following these tips, you can help to prevent chain oiler problems and keep your Husqvarna chainsaw 455 Rancher running smoothly.

FAQs: Husqvarna Chainsaw 455 Rancher Chain Oiler Not Working

Why is my Husqvarna chainsaw 455 rancher chain oiler not working?

There are a few possible reasons why your Husqvarna chainsaw 455 rancher chain oiler might not be working. Here are some of the most common causes:

The oiler is not turned on. Make sure that the oiler switch is in the On position.
The oiler is clogged. The oiler can become clogged with sawdust and debris, which can prevent the oil from flowing to the chain. To clean the oiler, remove the oiler cover and clean out the inside with a small brush.
The oiler hose is kinked or damaged. The oiler hose can become kinked or damaged, which can prevent the oil from flowing to the chain. To check the oiler hose, inspect it for kinks or damage. If the hose is damaged, you will need to replace it.
The oil level is low. The oil level in the oil reservoir can become low, which can prevent the oil from flowing to the chain. To check the oil level, remove the oil cap and look inside the oil reservoir. If the oil level is low, you will need to add more oil.

How do I fix my Husqvarna chainsaw 455 rancher chain oiler?

To fix your Husqvarna chainsaw 455 rancher chain oiler, you will need to identify the cause of the problem and take the appropriate steps to fix it. Here are some of the steps you can take to fix a clogged oiler:

1. Turn off the chainsaw and disconnect the spark plug wire.
2. Remove the oiler cover.
3. Clean out the inside of the oiler with a small brush.
4. Reinstall the oiler cover.
5. Turn on the chainsaw and test the oiler.

If the oiler is not turned on, you can fix it by following these steps:

1. Turn on the chainsaw.
2. Check the oiler switch to make sure it is in the On position.
3. If the oiler switch is in the On position, but the oiler is still not working, you will need to replace the oiler switch.

If the oiler hose is kinked or damaged, you can fix it by following these steps:

1. Disconnect the oiler hose from the chainsaw.
2. Repair or replace the damaged hose.
3. Reconnect the oiler hose to the chainsaw.

If the oil level is low, you can fix it by following these steps:

1. Remove the oil cap from the chainsaw.
2. Add more oil to the oil reservoir until the oil level reaches the Full mark.
3. Reinstall the oil cap.

What are the symptoms of a bad Husqvarna chainsaw 455 rancher chain oiler?

There are a few symptoms that can indicate that your Husqvarna chainsaw 455 rancher chain oiler is bad. These symptoms include:

The chain is not getting enough oil, which can cause it to overheat and wear out prematurely.
The chain is smoking or sparking, which can be a sign that the oiler is not working properly.
The chain is skipping or jumping, which can be a sign that the chain is not lubricated properly.
The chain is dull or damaged, which can be a sign that the chain is not getting enough oil.

What is the best way to maintain my Husqvarna chainsaw 455 rancher chain oiler?

The best way to maintain your Husqvarna chainsaw 455 rancher chain oiler is to follow these steps:

Check the oil level regularly and add more oil as needed. The oil level should be between the Full and Add marks on the oil reservoir.
Clean the oiler regularly. The oiler can become clogged with sawdust and debris, which can prevent the oil from flowing to the chain. To clean the oiler, remove the oiler cover and clean out the inside with a small brush.
Inspect the oiler hose regularly for kinks or damage. If the oiler hose is kinked or damaged, it can prevent the oil from flowing to the chain. To check the oiler hose, inspect it for kinks or damage. If the hose is damaged, you will need to replace it.

What are the replacement parts for a Husqvarna chainsaw

Next Post You May Like: Husqvarna Chainsaw 455 Rancher Oiler Not Working