Husqvarna Chainsaw 455 Rancher Oiler Not Working
As a chainsaw owner, there are few things more frustrating than having your saw not work properly. One of the most common problems that can occur is when the oiler stops working. This can be a major inconvenience, as it can lead to the saw overheating and eventually becoming damaged. If you’re experiencing this issue with your Husqvarna 455 Rancher chainsaw, don’t worry – you’re not alone. In this guide, we’ll walk you through the steps to troubleshoot and resolve the problem so that you can get back to using your saw in no time.
Most Common Reasons Of Husqvarna Chainsaw 455 Rancher Oiler Not Working
No Oil in the Tank
The most common reason for a chainsaw 455 Rancher oljer not working is that there is no oil in the tank. Make sure the tank is full of oil and that the oil level is between the full and add marks on the side of the tank.
Clogged Oil Hose
Another common cause of a chainsaw 455 Rancher oljer not working is a clogged oil hose. The oil hose can become clogged with sawdust or other debris, which prevents the oil from flowing to the chain. To clean the oil hose, remove it from the chainsaw and soak it in a solvent such as acetone or mineral spirits. Then, use a pipe cleaner or other small, stiff object to clear any debris from the hose.
Defective Oiler Pump
If the oiler pump is defective, it may not be able to pump oil to the chain. To check the oiler pump, remove the oil cap and look inside the pump. If you see any damage to the pump, such as cracks or broken parts, it will need to be replaced.
Incorrect Oil Viscosity
Using the wrong oil viscosity can also cause the chainsaw 455 Rancher oljer not to work properly. The oil viscosity should be matched to the temperature of the operating environment. For example, a thinner oil should be used in warm weather, while a thicker oil should be used in cold weather.
Blocked Oil Passages
If the oil passages in the chainsaw are blocked, the oil will not be able to reach the chain. To check for blocked oil passages, remove the oil cap and look inside the chainsaw. If you see any blockages, such as sawdust or other debris, they will need to be cleared.
Incorrect Oil Level
If the oil level is too low, the oil will not be able to reach the chain. To check the oil level, remove the oil cap and look inside the chainsaw. The oil level should be between the full and add marks on the side of the tank.
How to Troubleshoot: Husqvarna Chainsaw 455 Rancher Oiler Not Working
Symptoms
If the oiler on your Husqvarna chainsaw 455 Rancher is not working, you may notice one or more of the following symptoms:
The chain is not being lubricated properly, and is starting to wear out quickly.
The bar is becoming hot, and may even start to smoke.
The chainsaw is making a loud squealing noise.
The chainsaw is losing power.
Causes
There are a number of possible causes for a Husqvarna chainsaw 455 Rancher oiler not working. These include:
A clogged oiler pump. The oiler pump is responsible for pumping oil to the chain. If the pump becomes clogged, it will not be able to pump oil to the chain, and the chain will not be lubricated properly.
A faulty oiler hose. The oiler hose is responsible for transporting oil from the oiler pump to the chain. If the hose becomes kinked or damaged, it will not be able to transport oil to the chain, and the chain will not be lubricated properly.
A faulty oiler filter. The oiler filter is responsible for filtering out impurities from the oil. If the filter becomes clogged, it will not be able to filter out impurities from the oil, and the oil will not be able to lubricate the chain properly.
A low oil level. If the oil level in the chainsaw is too low, the oiler will not be able to pump oil to the chain.
Troubleshooting
To troubleshoot a Husqvarna chainsaw 455 Rancher oiler not working, you will need to:
1. Check the oil level. Make sure that the oil level in the chainsaw is at least halfway up the sight glass. If the oil level is too low, add more oil to the chainsaw.
2. Check the oiler pump. Remove the oiler pump cover and inspect the pump for any damage. If the pump is damaged, it will need to be replaced.
3. Check the oiler hose. Inspect the oiler hose for any kinks or damage. If the hose is damaged, it will need to be replaced.
4. Check the oiler filter. Remove the oiler filter and inspect it for any debris. If the filter is clogged, clean it or replace it.
Solutions
Once you have identified the cause of the problem, you can fix it by following the steps below:
If the oil level is too low, add more oil to the chainsaw.
If the oiler pump is damaged, replace it.
If the oiler hose is damaged, replace it.
If the oiler filter is clogged, clean it or replace it.
Prevention
To prevent your Husqvarna chainsaw 455 Rancher oiler from not working, you can take the following steps:
Keep the oil level at least halfway up the sight glass.
Inspect the oiler pump, hose, and filter regularly for any damage or debris.
Replace the oiler pump, hose, and filter as needed.
By following these tips, you can help to ensure that your Husqvarna chainsaw 455 Rancher oiler continues to work properly.
FAQs: Husqvarna Chainsaw 455 Rancher Oiler Not Working
Why is my Husqvarna chainsaw 455 rancher oiler not working?
There are a few possible reasons why your Husqvarna chainsaw 455 rancher oiler may not be working.
The oiler may be clogged. This can happen if the oiler becomes filled with sawdust or other debris. To clean the oiler, remove the oiler cover and clean out the inside with a small brush.
The oiler may be empty. Make sure that the oiler is filled with oil. The oil level should be between the full and add marks on the oiler.
The oiler may be defective. If the oiler is defective, it will need to be replaced.
How do I clean the oiler on my Husqvarna chainsaw 455 rancher?
To clean the oiler on your Husqvarna chainsaw 455 rancher, follow these steps:
1. Turn off the chainsaw and allow it to cool down.
2. Remove the oiler cover by unscrewing the two screws that hold it in place.
3. Use a small brush to clean out the inside of the oiler.
4. Reinstall the oiler cover.
How do I check the oil level on my Husqvarna chainsaw 455 rancher?
To check the oil level on your Husqvarna chainsaw 455 rancher, follow these steps:
1. Turn off the chainsaw and allow it to cool down.
2. Locate the oil level window on the side of the chainsaw.
3. Look through the oil level window to see the level of oil in the oil tank.
The oil level should be between the full and add marks on the oil tank.
How do I replace the oiler on my Husqvarna chainsaw 455 rancher?
To replace the oiler on your Husqvarna chainsaw 455 rancher, follow these steps:
1. Turn off the chainsaw and allow it to cool down.
2. Remove the old oiler by unscrewing the two screws that hold it in place.
3. Apply a small amount of oil to the gasket of the new oiler.
4. Install the new oiler by screwing it into place.
5. Tighten the screws until the oiler is secure.
What happens if I run my Husqvarna chainsaw 455 rancher without oil?
Running your Husqvarna chainsaw 455 rancher without oil can damage the engine. The oil lubricates the engine and prevents it from overheating. If the engine runs without oil, it can overheat and seize up. This can damage the engine and make it difficult to start.
It is important to check the oil level in your chainsaw regularly and to add oil as needed. You should also make sure that you are using the correct type of oil for your chainsaw.
Next Post You May Like: Husqvarna Chainsaw 55 Chain Brake Not Working
