What to Do
Your Makita miter saw is a powerful tool that can make quick and accurate cuts. But what happens when the electric brake stops working This can be a frustrating problem, but it’s one that you can usually fix yourself.
In this blog post, I’ll explain what causes the electric brake on a Makita miter saw to fail and how to fix it. I’ll also provide some tips on how to prevent this problem from happening in the future.
So if your Makita miter saw’s electric brake isn’t working, read on for help!
So Makita Miter Saw Electric Brake Not Working
Makita Miter Saw Electric Brake Not Working: How to Fix It
If the electric brake on your Makita miter saw is not working, you can fix it by following these steps:
1. Disconnect the saw from the power outlet.
2. Remove the two screws that secure the brake cover.
3. Remove the brake cover.
4. Inspect the brake assembly for damage.
5. Replace any damaged parts.
6. Reassemble the brake assembly.
7. Reattach the brake cover.
8. Reconnect the saw to the power outlet.
The electric brake on your Makita miter saw should now be working properly.
Makita Miter Saw Electric Brake Not Working
Symptoms
There are a few symptoms that may indicate that the electric brake on your Makita miter saw is not working properly. These include:
The saw blade does not stop spinning when you release the trigger.
The saw blade continues to spin for a few seconds after you release the trigger.
The saw blade makes a high-pitched squealing noise when you release the trigger.
The saw blade does not stop spinning when you press the brake button.
Causes
There are a few possible causes for an electric brake on a Makita miter saw not working properly. These include:
A faulty brake switch.
A dirty or damaged brake pad.
A loose or damaged brake cable.
A problem with the saw’s electrical system.
Solutions
If you suspect that the electric brake on your Makita miter saw is not working properly, you should first try to troubleshoot the problem yourself. Here are a few things you can check:
Check the brake switch:
The brake switch is a small switch located on the front of the saw. It is usually a red button. To check the brake switch, turn on the saw and press the brake button. If the saw blade stops spinning, the brake switch is working properly. If the saw blade does not stop spinning, the brake switch may be faulty. You can replace the brake switch yourself or take the saw to a qualified repair technician.
Clean or replace the brake pad:
The brake pad is a small, flat piece of metal that is located on the inside of the saw blade. It is used to stop the saw blade from spinning. To check the brake pad, remove the saw blade from the saw. If the brake pad is dirty or damaged, you should clean it or replace it. You can clean the brake pad with a wire brush. If the brake pad is damaged, you should replace it.
Check the brake cable:
The brake cable is a metal cable that connects the brake switch to the brake pad. It is used to transmit the force from the brake switch to the brake pad. To check the brake cable, inspect it for damage. If the brake cable is damaged, you should replace it.
Check the saw’s electrical system:
If you have checked the brake switch, the brake pad, and the brake cable and the problem persists, you may have a problem with the saw’s electrical system. You should take the saw to a qualified repair technician to have the electrical system diagnosed and repaired.
Prevention
You can help prevent problems with the electric brake on your Makita miter saw by following these tips:
Keep the brake switch clean and free of debris:
Inspect the brake pad regularly for wear and tear:
Replace the brake pad when it is worn out:
Inspect the brake cable regularly for damage:
Replace the brake cable when it is damaged:
Have the saw’s electrical system checked regularly by a qualified repair technician:
Also Read THis: Makita Sliding Miter Saw Electric Brake Not Working
FAQs: Makita Miter Saw Electric Brake Not Working
Why is my Makita miter saw electric brake not working?
There are a few possible reasons why your Makita miter saw electric brake may not be working. Here are some of the most common causes:
The brake is not properly engaged: Make sure that the brake is fully engaged before you start using the saw. If the brake is not engaged, it will not be able to stop the blade from spinning when you release the trigger.
The brake is worn out: The brake pads in your miter saw can wear out over time, which will make them less effective at stopping the blade. If you think the brake is worn out, you should have it replaced by a qualified technician.
The brake is damaged: The brake in your miter saw can be damaged if it is subjected to a sudden impact or if it is not used properly. If you think the brake is damaged, you should have it repaired or replaced by a qualified technician.
How do I fix my Makita miter saw electric brake?
If your Makita miter saw electric brake is not working, you can try to fix it yourself or you can have it repaired by a qualified technician. Here are some steps you can take to try to fix the brake yourself:
1. Check the brake engagement: Make sure that the brake is fully engaged before you start using the saw. If the brake is not engaged, it will not be able to stop the blade from spinning when you release the trigger.
2. Inspect the brake pads: If the brake pads are worn out, they will need to be replaced. You can check the brake pads by looking at them through the access hole in the saw. If the pads are worn down to the metal, they will need to be replaced.
3. Inspect the brake assembly: If the brake assembly is damaged, it will need to be repaired or replaced. You can inspect the brake assembly by removing the access panel on the saw. If the assembly is damaged, you will need to have it repaired or replaced by a qualified technician.
What should I do if I can’t fix my Makita miter saw electric brake?
If you can’t fix your Makita miter saw electric brake yourself, you should have it repaired by a qualified technician. A qualified technician will be able to diagnose the problem and repair or replace the brake as needed.
How can I prevent my Makita miter saw electric brake from failing?
There are a few things you can do to prevent your Makita miter saw electric brake from failing. Here are some tips:
Use the brake properly: Make sure that you engage the brake before you start using the saw and release it when you are finished.
Inspect the brake regularly: Check the brake pads for wear and tear and inspect the brake assembly for damage.
Have the brake serviced regularly: Have the brake serviced by a qualified technician at least once a year.
By following these tips, you can help to keep your Makita miter saw electric brake in good working order and prevent it from failing.
What are the signs that my Makita miter saw electric brake is failing?
There are a few signs that your Makita miter saw electric brake may be failing. Here are some of the most common signs:
The brake is not engaging properly: The brake may not be engaging fully or it may not be engaging at all.
The brake is making a grinding or squealing noise: This noise is usually caused by the brake pads rubbing against the blade.
The blade is not stopping when you release the trigger: The blade may continue to spin for a few seconds after you release the trigger.
If you notice any of these signs, you should have the brake inspected by a qualified technician.
