How to Fix
Your Makita sliding miter saw is a powerful and versatile tool, but it can be frustrating when the electric brake isn’t working properly. A malfunctioning brake can be dangerous, as it can allow the saw blade to continue spinning after you’ve stopped cutting. Fortunately, there are a few simple steps you can take to fix the problem.
In this blog post, we’ll walk you through the process of troubleshooting and repairing a Makita sliding miter saw electric brake. We’ll also provide some tips on how to prevent future problems.
So if your Makita sliding miter saw’s electric brake isn’t working, read on for help!
So Makita Sliding Miter Saw Electric Brake Not Working
Makita Sliding Miter Saw Electric Brake Not Working: How to Fix It
If the electric brake on your Makita sliding miter saw is not working, you can fix it by following these steps:
1. Disconnect the saw from the power outlet.
2. Remove the two screws that secure the brake cover to the saw.
3. Remove the brake cover.
4. Inspect the brake assembly for damage. If the brake pads are worn or damaged, replace them.
5. Reassemble the brake assembly and replace the brake cover.
6. Reconnect the saw to the power outlet and test the brake.
Makita Sliding Miter Saw Electric Brake Not Working
Symptoms of a Makita Sliding Miter Saw Electric Brake Not Working
The saw blade does not stop spinning when you release the trigger.
The saw blade continues to coast after you release the trigger.
The saw blade makes a high-pitched squealing noise when you release the trigger.
The saw blade does not stop spinning when you engage the brake.
Causes of a Makita Sliding Miter Saw Electric Brake Not Working
There are a few possible causes of a Makita sliding miter saw electric brake not working. These include:
A faulty brake switch.
A faulty brake solenoid.
A dirty or damaged brake pad.
A loose or damaged brake cable.
How to Fix a Makita Sliding Miter Saw Electric Brake Not Working
To fix a Makita sliding miter saw electric brake not working, you will need to:
1. Inspect the brake switch.
2. Inspect the brake solenoid.
3. Inspect the brake pad.
4. Inspect the brake cable.
Inspecting the Brake Switch
To inspect the brake switch, you will need to:
1. Turn off the saw and disconnect the power cord.
2. Remove the saw blade.
3. Locate the brake switch.
4. Press the brake switch and check for a clicking sound.
If you do not hear a clicking sound, the brake switch is faulty and will need to be replaced.
Inspecting the Brake Solenoid
To inspect the brake solenoid, you will need to:
1. Turn off the saw and disconnect the power cord.
2. Remove the saw blade.
3. Locate the brake solenoid.
4. Inspect the brake solenoid for damage.
If the brake solenoid is damaged, it will need to be replaced.
Inspecting the Brake Pad
To inspect the brake pad, you will need to:
1. Turn off the saw and disconnect the power cord.
2. Remove the saw blade.
3. Locate the brake pad.
4. Inspect the brake pad for damage.
If the brake pad is damaged, it will need to be replaced.
Inspecting the Brake Cable
To inspect the brake cable, you will need to:
1. Turn off the saw and disconnect the power cord.
2. Remove the saw blade.
3. Locate the brake cable.
4. Inspect the brake cable for damage.
If the brake cable is damaged, it will need to be replaced.
Replacing the Brake Switch
To replace the brake switch, you will need to:
1. Remove the old brake switch.
2. Install the new brake switch.
3. Reconnect the power cord.
4. Test the brake switch.
Replacing the Brake Solenoid
To replace the brake solenoid, you will need to:
1. Remove the old brake solenoid.
2. Install the new brake solenoid.
3. Reconnect the power cord.
4. Test the brake solenoid.
Replacing the Brake Pad
To replace the brake pad, you will need to:
1. Remove the old brake pad.
2. Install the new brake pad.
3. Reconnect the power cord.
4. Test the brake pad.
Replacing the Brake Cable
To replace the brake cable, you will need to:
1. Remove the old brake cable.
2. Install the new brake cable.
3. Reconnect the power cord.
4. Test the brake cable.
Conclusion
If you are unable to fix the Makita sliding miter saw electric brake yourself, you can take it to a qualified technician for repairs.
Also Read THis: Master Works Electric Reciprocating Saw Ers 132
FAQs: Makita Sliding Miter Saw Electric Brake Not Working
Why is my Makita sliding miter saw electric brake not working?
There are a few possible reasons why your Makita sliding miter saw electric brake may not be working. Here are some of the most common causes:
The brake is not properly adjusted: The brake on a Makita sliding miter saw is designed to engage when the saw blade reaches a certain speed. If the brake is not properly adjusted, it may not engage properly and the saw blade may continue to spin after you have released the trigger.
The brake is worn out: The brake on a Makita sliding miter saw is a mechanical device that uses friction to stop the saw blade. Over time, the brake pads can wear out and become less effective. This can cause the brake to engage too slowly or not at all.
The brake is damaged: The brake on a Makita sliding miter saw can be damaged if it is subjected to excessive force or if it is not properly maintained. If the brake is damaged, it may not be able to engage properly or it may engage too forcefully.
How do I adjust the brake on my Makita sliding miter saw?
To adjust the brake on your Makita sliding miter saw, follow these steps:
1. Turn off the saw and unplug it from the power outlet.
2. Locate the brake adjustment screw. The brake adjustment screw is usually located on the side of the saw, near the brake lever.
3. Use a small screwdriver to turn the brake adjustment screw clockwise to increase the brake tension or counterclockwise to decrease the brake tension.
4. Retest the brake by turning on the saw and applying the brake lever. The saw blade should stop within a few inches of the table.
How do I replace the brake pads on my Makita sliding miter saw?
To replace the brake pads on your Makita sliding miter saw, follow these steps:
1. Turn off the saw and unplug it from the power outlet.
2. Remove the saw blade.
3. Remove the brake cover. The brake cover is usually located on the side of the saw, near the brake lever.
4. Remove the old brake pads. The old brake pads are usually held in place by a retaining clip.
5. Install the new brake pads. Make sure that the new brake pads are properly seated in the brake housing.
6. Reinstall the brake cover.
7. Reinstall the saw blade.
How do I troubleshoot a Makita sliding miter saw electric brake that is not working?
If your Makita sliding miter saw electric brake is not working, here are some troubleshooting steps you can try:
1. Check the brake adjustment screw. Make sure that the brake adjustment screw is properly adjusted.
2. Check the brake pads. Make sure that the brake pads are not worn out or damaged.
3. Check the brake housing. Make sure that the brake housing is not damaged.
4. Check the electrical connection to the brake. Make sure that the electrical connection is properly made.
If you have tried all of these troubleshooting steps and the brake is still not working, you may need to take the saw to a qualified service center for repairs.
What are the safety precautions I should take when using a Makita sliding miter saw with an electric brake?
When using a Makita sliding miter saw with an electric brake, it is important to take the following safety precautions:
Always wear safety glasses and gloves:
Make sure that the saw is properly grounded:
Do not operate the saw if it is damaged or if the brake is not working properly:
Never reach over the saw blade while it is in operation:
Always use the correct blade for the material you are cutting:
Keep the work area clean and free of debris:
Be aware of your surroundings and the people working around you:
By following these safety precautions, you can help to prevent injuries and accidents when using a Makita sliding miter saw with an electric brake.
