If your North Star industrial hot water pressure washer heater isn’t working, you know how frustrating it can be. You can’t use your pressure washer to clean your driveway, your siding, or your car. You’re left with a dirty mess and no way to clean it up.
But don’t despair. In this troubleshooting guide, I’ll show you how to diagnose and fix the problem so that you can get your pressure washer up and running again in no time.
Reasons Why North Star Industrial Hot Water Pressure Washer Heater Not Working
1. No Power to the Heater Element
The most common reason for a North Star Industrial Hot Water Pressure Washer heater not working is that there is no power to the heater element. This can be caused by a number of things, including:
A blown fuse
A tripped circuit breaker
A loose or damaged connection
A faulty control board
2. Faulty Heater Element
If the heater element is faulty, it will not be able to generate heat. This can be caused by a number of things, including:
A cracked or broken element
A buildup of sediment or scale on the element
A short circuit in the element
3. Clogged Water Inlet
If the water inlet is clogged, the heater will not be able to get enough water to generate heat. This can be caused by a number of things, including:
A build-up of sediment or scale in the inlet
A kinked or damaged hose
A faulty water pump
4. Thermostat Fault
The thermostat controls the temperature of the water in the pressure washer. If the thermostat is faulty, it may not be able to maintain the desired temperature. This can be caused by a number of things, including:
A broken or damaged thermostat
A loose or damaged connection
A faulty control board
How to Troubleshoot And Fix: north star industrial hot water pressure washer heater not working
Symptoms of a North Star Industrial Hot Water Pressure Washer Heater Not Working
There are a few different symptoms that can indicate that the heater on your North Star Industrial hot water pressure washer is not working properly. These include:
The pressure washer is not producing hot water
The water coming out of the pressure washer is cold
The pressure washer is making a loud humming or buzzing noise
The pressure washer is overheating
The pressure washer is leaking water
Troubleshooting a North Star Industrial Hot Water Pressure Washer Heater
If you are experiencing any of the symptoms listed above, it is important to troubleshoot the problem to determine the cause. Here are a few things you can check:
Check the power supply:
Make sure that the pressure washer is plugged in and that the power switch is turned on.
Check the thermostat:
The thermostat controls the temperature of the water in the pressure washer. If the thermostat is set too low, the water will not get hot enough.
Check the heating element:
The heating element is what heats the water in the pressure washer. If the heating element is damaged, it will not be able to heat the water.
Check the water flow:
If the water flow is too low, the heating element will not be able to heat the water properly.
Check the hoses and connectors:
Make sure that the hoses and connectors are not damaged or leaking.
Fixing a North Star Industrial Hot Water Pressure Washer Heater
Once you have determined the cause of the problem, you can fix the heater. Here are a few things you can do:
Replace the thermostat:
If the thermostat is set too low, you can replace it with a thermostat that is set to a higher temperature.
Replace the heating element:
If the heating element is damaged, you can replace it with a new heating element.
Clean the hoses and connectors:
If the hoses and connectors are damaged or leaking, you can clean them or replace them.
Preventing North Star Industrial Hot Water Pressure Washer Heater Problems
There are a few things you can do to prevent problems with your North Star Industrial hot water pressure washer heater:
Keep the pressure washer clean:
Make sure to clean the pressure washer regularly to prevent dirt and debris from building up and causing problems.
Use the right water pressure:
Using the wrong water pressure can damage the heater. Make sure to use the water pressure that is recommended for your pressure washer.
Don’t overload the pressure washer:
Overloading the pressure washer can cause the heater to overheat. Make sure to only use the pressure washer for tasks that are within its capacity.
By following these tips, you can help prevent problems with your North Star Industrial hot water pressure washer heater.
Also Read THis: North Star Pressure Washer Chemical Injector Not Working
FAQs: North Star Industrial Hot Water Pressure Washer Heater Not Working
Why is my North Star Industrial Hot Water Pressure Washer Heater not working?
There are a few possible reasons why your North Star Industrial Hot Water Pressure Washer Heater may not be working. Here are some of the most common causes:
The heater element is burned out: This is the most common cause of a hot water pressure washer heater not working. The heater element is a small metal coil that heats the water as it passes through it. If the heater element is burned out, it will no longer be able to heat the water.
The thermostat is not working properly: The thermostat controls the temperature of the water in the pressure washer. If the thermostat is not working properly, it may not be able to turn the heater on or off when it needs to.
The water pump is not working properly: The water pump is responsible for sending water through the heater element. If the water pump is not working properly, it may not be able to provide enough water to the heater element to heat it up.
The pressure washer is not getting enough water: If the pressure washer is not getting enough water, it will not be able to heat the water properly. This can be caused by a number of things, such as a clogged water filter or a kinked hose.
The pressure washer is not properly maintained: If the pressure washer is not properly maintained, it may not be able to heat the water properly. This can be caused by a number of things, such as a dirty water filter or a clogged air filter.
What can I do if my North Star Industrial Hot Water Pressure Washer Heater is not working?
If your North Star Industrial Hot Water Pressure Washer Heater is not working, there are a few things you can do to try to fix it. Here are some troubleshooting tips:
Check the heater element: The first thing you should do is check the heater element to see if it is burned out. To do this, you will need to remove the access panel on the bottom of the pressure washer. Once you have removed the access panel, you will be able to see the heater element. If the heater element is burned out, you will need to replace it.
Check the thermostat: The next thing you should check is the thermostat. To do this, you will need to remove the access panel on the top of the pressure washer. Once you have removed the access panel, you will be able to see the thermostat. If the thermostat is not working properly, you will need to replace it.
Check the water pump: The next thing you should check is the water pump. To do this, you will need to remove the access panel on the side of the pressure washer. Once you have removed the access panel, you will be able to see the water pump. If the water pump is not working properly, you will need to replace it.
Check the water supply: Make sure that the pressure washer is getting enough water. If the pressure washer is not getting enough water, it will not be able to heat the water properly. This can be caused by a number of things, such as a clogged water filter or a kinked hose.
Maintain your pressure washer: Make sure that you are properly maintaining your pressure washer. This includes regularly cleaning the water filter and the air filter. It also includes regularly changing the oil and the spark plug.
What are the signs that my North Star Industrial Hot Water Pressure Washer Heater is not working properly?
There are a few signs that your North Star Industrial Hot Water Pressure Washer Heater is not working properly. Here are some of the most common signs:
The water coming out of the pressure washer is not hot.
The pressure washer is not able to build up pressure.
The pressure washer is making a loud noise.
The pressure washer is smoking.
The pressure washer is leaking water.
What are the dangers of using a North Star Industrial Hot Water Pressure Washer with a non-working heater?
There are a few dangers of using a North Star Industrial Hot Water Pressure Washer with a non-working heater. Here are some of the most common dangers:
You could burn yourself. If the water coming out of the pressure washer is not hot, you could burn yourself if you touch it.
You could damage your property. If the pressure washer is not able to build up pressure, it could damage your property.
You could injure yourself. If the pressure washer is making a loud noise or smoking, it could injure you if you are
