If your pressure washer siphon tube isn’t working, you’re not alone. This is a common problem that can be frustrating and inconvenient. But don’t worry, it’s usually an easy fix.
In this guide, I’ll walk you through the steps to troubleshoot and repair a pressure washer siphon tube that isn’t working. I’ll also provide some tips on how to prevent this problem from happening in the future.
So if you’re ready to get your pressure washer up and running again, let’s get started!
Why Pressure Washer Siphon Tube Not Working
Clogged Siphon Tube
The most common reason for a pressure washer siphon tube not working is a clogged siphon tube. This can be caused by dirt, debris, or other materials blocking the tube. To fix this problem, you will need to clean the siphon tube.
Incorrect Water Level
Another common reason for a pressure washer siphon tube not working is an incorrect water level. The water level in the tank should be between 1/4 and 1/2 full. If the water level is too low, the siphon tube will not be able to create enough suction to draw water from the tank. If the water level is too high, the siphon tube will be flooded and will not be able to draw water from the tank.
Damaged Siphon Tube
A damaged siphon tube can also cause the pressure washer to not work properly. If the siphon tube is cracked or broken, it will not be able to create enough suction to draw water from the tank. To fix this problem, you will need to replace the siphon tube.
Blocked Water Inlet
The water inlet on the pressure washer can also become blocked, which can prevent the siphon tube from working properly. To fix this problem, you will need to clean the water inlet.
How to Troubleshoot And Fix: pressure washer siphon tube not working
Symptoms of a faulty siphon tube
There are a few signs that can indicate that your pressure washer siphon tube is not working properly. These include:
The pressure washer is not generating enough pressure.
The pressure washer is making a gurgling or bubbling noise.
The pressure washer is leaking water from the siphon tube.
The pressure washer is not cleaning as effectively as it used to.
How to troubleshoot a faulty siphon tube
If you suspect that your pressure washer siphon tube is not working properly, you can try to troubleshoot the problem yourself. Here are a few steps to follow:
1. Inspect the siphon tube for damage:
Look for cracks, kinks, or other damage that could be preventing the tube from working properly. If you find any damage, you will need to replace the tube.
2. Check the siphon tube for blockages:
The siphon tube can become blocked with debris, which can prevent the water from flowing properly. To check for blockages, you can try to blow through the tube or use a small brush to clean it out.3. Check the siphon tube for leaks:
If the siphon tube is leaking, you will need to repair or replace the tube. To repair a leak, you can try to apply a sealant around the damaged area. If the leak is too large, you will need to replace the tube.
How to fix a faulty siphon tube
If you are unable to troubleshoot the problem yourself, you may need to have the siphon tube repaired or replaced by a qualified technician.
Preventing future problems
You can help prevent future problems with your pressure washer siphon tube by following these tips:
Keep the siphon tube free of debris.
Inspect the siphon tube regularly for damage or leaks.
Replace the siphon tube if it is damaged or worn out.
By following these tips, you can help keep your pressure washer running smoothly and efficiently.
FAQs: Pressure Washer Siphon Tube Not Working
Why is my pressure washer siphon tube not working?
There are a few possible reasons why your pressure washer siphon tube might not be working. Here are some of the most common:
The tube is clogged: If the tube is clogged with dirt or debris, it will not be able to draw water from the reservoir. To fix this, you can try cleaning the tube with a wire brush or by running a garden hose through it.
The tube is kinked: If the tube is kinked, it will also prevent water from flowing through it. To fix this, you can try straightening out the kink or replacing the tube altogether.
The tube is not connected properly: Make sure that the tube is securely connected to the pressure washer and the reservoir. If it is not connected properly, water will not be able to flow through the tube.
The pressure washer is not turned on: Make sure that the pressure washer is turned on and that the water is turned on at the faucet. If the pressure washer is not turned on, water will not be able to flow through the tube.
How do I fix a clogged pressure washer siphon tube?
To fix a clogged pressure washer siphon tube, you can try the following steps:
1. Turn off the pressure washer and disconnect the tube from the pressure washer and the reservoir.
2. Use a wire brush or a garden hose to clean out the inside of the tube.
3. Reattach the tube to the pressure washer and the reservoir.
4. Turn on the pressure washer and test it to make sure that the tube is working properly.
How do I fix a kinked pressure washer siphon tube?
To fix a kinked pressure washer siphon tube, you can try the following steps:
1. Turn off the pressure washer and disconnect the tube from the pressure washer and the reservoir.
2. Carefully straighten out the kink in the tube.
3. Reattach the tube to the pressure washer and the reservoir.
4. Turn on the pressure washer and test it to make sure that the tube is working properly.
How do I make sure that my pressure washer siphon tube is connected properly?
To make sure that your pressure washer siphon tube is connected properly, you can try the following steps:
1. Turn off the pressure washer and disconnect the tube from the pressure washer and the reservoir.
2. Inspect the connections to make sure that they are tight and secure.
3. Reattach the tube to the pressure washer and the reservoir.
4. Turn on the pressure washer and test it to make sure that the tube is working properly.
What should I do if my pressure washer siphon tube is still not working?
If your pressure washer siphon tube is still not working after you have tried the steps above, you may need to replace the tube. To replace the tube, you can follow these steps:
1. Turn off the pressure washer and disconnect the tube from the pressure washer and the reservoir.
2. Remove the old tube from the pressure washer and the reservoir.
3. Install the new tube on the pressure washer and the reservoir.
4. Turn on the pressure washer and test it to make sure that the tube is working properly.
Also Read: Pressure Washer Water Pump Not Working
