There’s nothing more frustrating than having a pressure washer that won’t work, especially when you’re in the middle of a big project. Not only is it inconvenient, but it can also be dangerous. If you’re dealing with a pressure washer that won’t work with the water tank, there are a few things you can check to try to fix the problem. In this guide, we’ll walk you through the steps to troubleshoot a pressure washer that’s not working with the water tank, so you can get back to cleaning as quickly as possible.
Reasons Why Pressure Washer Not Working With Water Tank
No Water Flow
No water supply to the pressure washer:
Check the water supply hose to make sure it is connected to the pressure washer and the water source. Make sure the water valve is turned on.
Clogged water filter:
Remove the water filter and clean it with a brush. If the filter is damaged, replace it with a new one.
Clogged inlet valve:
Remove the inlet valve and clean it with a brush. If the valve is damaged, replace it with a new one.
Damaged pump:
If the pump is damaged, it will need to be repaired or replaced.
Low Water Pressure
Low water pressure at the water source:
Check the water pressure at the faucet to make sure it is adequate.
Clogged water filter:
See above.
Clogged inlet valve:
See above.
Damaged pump:
See above.
Restricted hose:
Make sure the water hose is not kinked or restricted.
Pressure washer is set to too high of a pressure setting:
Reduce the pressure setting on the pressure washer.
Pressure Washer Won’t Start
The pressure washer is not plugged in:
Make sure the pressure washer is plugged into an outlet.
The pressure washer is turned off:
Turn on the pressure washer.
The pressure washer is out of gas:
Fill the gas tank with gasoline.
The spark plug is fouled:
Remove the spark plug and clean it with a spark plug cleaner. If the spark plug is damaged, replace it with a new one.
The air filter is dirty:
Remove the air filter and clean it with a brush. If the air filter is damaged, replace it with a new one.
The carburetor is dirty:
Clean the carburetor with carburetor cleaner.
The engine is damaged:
If the engine is damaged, it will need to be repaired or replaced.
How to Troubleshoot and Fix: Pressure Washer Not Working with Water Tank
Symptoms of a Pressure Washer Not Working with Water Tank
There are a few different symptoms that can indicate that your pressure washer is not working properly with the water tank. These include:
The pressure washer is not producing any pressure or is producing very low pressure.
The water is not coming out of the pressure washer nozzle.
The water is coming out of the pressure washer nozzle in a weak or erratic stream.
The pressure washer is making strange noises.
The pressure washer is overheating.
Troubleshooting a Pressure Washer Not Working with Water Tank
If your pressure washer is not working properly with the water tank, there are a few things you can check to troubleshoot the problem.
1. Check the water supply:
Make sure that the water supply to the pressure washer is turned on and that there is enough water pressure. If the water supply is turned off or there is not enough water pressure, the pressure washer will not be able to produce any pressure.
2. Check the water filter:
The water filter on a pressure washer can become clogged with dirt and debris, which can restrict the flow of water and cause the pressure washer to not work properly. To check the water filter, remove it from the pressure washer and clean it with a hose.3. Check the hoses:
The hoses on a pressure washer can become kinked or damaged, which can also restrict the flow of water and cause the pressure washer to not work properly. To check the hoses, inspect them for any kinks or damage. If you find any kinks or damage, replace the hoses.
4. Check the pump:
The pump on a pressure washer can become damaged, which can prevent the pressure washer from producing any pressure. To check the pump, listen for any strange noises coming from the pressure washer. If you hear any strange noises, the pump may be damaged and will need to be replaced.
5. Check the electrical components:
The electrical components on a pressure washer can malfunction, which can prevent the pressure washer from working properly. To check the electrical components, inspect them for any damage or corrosion. If you find any damage or corrosion, replace the damaged components.
Fixing a Pressure Washer Not Working with Water Tank
Once you have troubleshooted the problem, you can fix the pressure washer so that it is working properly again.
1. Fix the water supply:
If the water supply to the pressure washer is turned off or there is not enough water pressure, turn on the water supply or increase the water pressure.
2. Clean the water filter:
If the water filter on the pressure washer is clogged, remove it from the pressure washer and clean it with a hose.3. Replace the hoses:
If the hoses on the pressure washer are kinked or damaged, replace the hoses.
4. Replace the pump:
If the pump on the pressure washer is damaged, replace the pump.
5. Replace the electrical components:
If the electrical components on the pressure washer are damaged, replace the damaged components.
Preventing Problems with Your Pressure Washer
You can prevent problems with your pressure washer by following these tips:
Use the correct water pressure:
Do not exceed the maximum water pressure rating for your pressure washer.
Use the correct water filter:
Make sure that you are using the correct water filter for your pressure washer.
Inspect the hoses regularly:
Inspect the hoses on your pressure washer regularly for any kinks or damage. Replace the hoses if you find any kinks or damage.
Maintain the pump:
Maintain the pump on your pressure washer by following the manufacturer’s instructions.
Inspect the electrical components regularly:
Inspect the electrical components on your pressure washer regularly for any damage or corrosion. Replace the damaged components as needed.
By following these tips, you can help to prevent problems with your pressure washer and keep it working properly for years to come.
Also Read THis: Pressure Washer Nozzle Not Working Well
FAQs
Why is my pressure washer not working with water tank?
There are a few possible reasons why your pressure washer might not be working with your water tank. Here are some of the most common causes:
The water tank is empty: Make sure that the water tank is full before you start using your pressure washer.
The water tank valve is closed: Check to make sure that the valve on the water tank is open.
The water hose is kinked or blocked: Make sure that the water hose is not kinked or blocked.
The pressure washer pump is not working properly: If the pressure washer pump is not working properly, it will not be able to generate enough pressure to spray water.
The pressure washer nozzle is clogged: If the pressure washer nozzle is clogged, it will not be able to spray water properly.
How do I fix a pressure washer that’s not working with water tank?
To fix a pressure washer that’s not working with water tank, you will need to identify the cause of the problem and then take the appropriate steps to fix it. Here are some steps to help you troubleshoot the problem:
1. Check the water tank: Make sure that the water tank is full and that the valve on the water tank is open.
2. Check the water hose: Make sure that the water hose is not kinked or blocked.
3. Check the pressure washer pump: If the pressure washer pump is not working properly, you may need to have it repaired or replaced.
4. Check the pressure washer nozzle: If the pressure washer nozzle is clogged, you can try to clean it with a wire brush or needle.
What are the most common problems with pressure washers?
The most common problems with pressure washers include:
The pressure washer is not working: This can be caused by a number of problems, including a clogged water hose, a broken pressure washer pump, or a clogged pressure washer nozzle.
The pressure washer is leaking: This can be caused by a loose hose connection, a damaged pressure washer pump, or a cracked pressure washer tank.
The pressure washer is making a loud noise: This can be caused by a number of problems, including a worn-out pressure washer pump, a clogged pressure washer nozzle, or a damaged pressure washer hose.
The pressure washer is not spraying water: This can be caused by a number of problems, including a clogged water hose, a broken pressure washer pump, or a clogged pressure washer nozzle.
How can I prevent problems with my pressure washer?
There are a few things you can do to prevent problems with your pressure washer, including:
Read the owner’s manual and follow the instructions for use: This will help you to avoid making mistakes that could damage your pressure washer.
Inspect your pressure washer regularly for signs of wear and tear: This will help you to identify problems early on and fix them before they become serious.
Maintain your pressure washer regularly: This includes cleaning the water hose, pressure washer pump, and pressure washer nozzle.
Store your pressure washer properly: This will help to protect it from damage and extend its lifespan.
What should I do if my pressure washer is still not working after I have tried to fix it?
If your pressure washer is still not working after you have tried to fix it, you may need to have it repaired or replaced. You can contact a qualified pressure washer repair technician or you can purchase a new pressure washer.
