Your Troy-Bilt pressure washer is one of the most valuable tools in your arsenal for cleaning your home and property. But when the pump doesn’t work, it can be a major inconvenience. Not only can you not get the jobs done that you need to, but you may also be putting yourself at risk of injury.
If your Troy-Bilt pressure washer pump isn’t working, don’t panic. In this guide, we’ll walk you through the steps to troubleshoot the problem and get your pressure washer up and running again in no time.
Why Troy Bilt Pressure Washer Pump Not Working
Reasons Troy Bilt Pressure Washer Pump Not Working
No Water Flow
The most common reason for a Troy Bilt pressure washer pump not working is no water flow. This can be caused by a number of factors, including:
A clogged water filter:
The water filter is located at the inlet of the pressure washer. If it becomes clogged, it will restrict the flow of water to the pump. To clean the filter, remove it from the pressure washer and rinse it under running water.
A kinked or damaged hose:
The hose that connects the pressure washer to the water source can become kinked or damaged, which will restrict the flow of water to the pump. To check the hose, inspect it for kinks or damage. If you find any, replace the hose.
A faulty pressure washer pump:
If the pressure washer pump is faulty, it will not be able to generate enough pressure to push water through the hose. To check the pump, turn on the pressure washer and listen for the pump to start. If you do not hear the pump running, or if the pump is running but not generating any pressure, the pump may be faulty and will need to be replaced.
Low Pressure
Another common reason for a Troy Bilt pressure washer pump not working is low pressure. This can be caused by a number of factors, including:
A clogged nozzle:
The nozzle is located at the end of the pressure washer wand. If it becomes clogged, it will restrict the flow of water and reduce the pressure. To clean the nozzle, remove it from the wand and soak it in a vinegar and water solution for a few minutes. Then, rinse the nozzle under running water and reattach it to the wand.
A faulty pressure washer pump:
If the pressure washer pump is faulty, it will not be able to generate enough pressure to produce high-pressure water. To check the pump, turn on the pressure washer and listen for the pump to start. If you do not hear the pump running, or if the pump is running but not generating any pressure, the pump may be faulty and will need to be replaced.
Overheating
The Troy Bilt pressure washer pump can overheat if it is used for extended periods of time or if it is used on a hot day. If the pump overheats, it will shut down automatically to prevent damage. To prevent the pump from overheating, allow it to cool down for a few minutes before using it again.
Other Causes
There are a number of other reasons why a Troy Bilt pressure washer pump may not be working, including:
A faulty electrical connection:
If the electrical connection to the pressure washer is faulty, it will not be able to power the pump. To check the electrical connection, inspect the wires for damage and make sure that they are properly connected.
A faulty pressure washer switch:
If the pressure washer switch is faulty, it will not be able to turn the pump on or off. To check the switch, turn on the pressure washer and listen for the pump to start. If you do not hear the pump running, the switch may be faulty and will need to be replaced.
A faulty pressure washer hose:
If the pressure washer hose is faulty, it will not be able to properly connect to the pump. To check the hose, inspect it for damage and make sure that it is properly connected to the pump.
How to Troubleshoot And Fix: Troy Bilt Pressure Washer Pump Not Working
Symptoms of a Troy Bilt Pressure Washer Pump Not Working
There are a few different symptoms that can indicate that your Troy Bilt pressure washer pump is not working properly. These include:
The pressure washer is not producing any pressure.
The pressure washer is producing low pressure.
The pressure washer is making a whining or squealing noise.
The pressure washer is leaking fluid.
The pressure washer is smoking.
Troubleshooting a Troy Bilt Pressure Washer Pump
If you are experiencing any of the symptoms listed above, you can try troubleshooting the problem yourself before calling a professional. Here are a few steps to follow:
1. Check the power supply:
Make sure that the pressure washer is plugged in and that the power switch is turned on.
2. Check the water supply:
Make sure that the water hose is connected to the pressure washer and that the water is turned on.3. Check the pressure washer filter:
The pressure washer filter can become clogged with dirt and debris, which can restrict the flow of water and cause the pressure washer to not work properly. To clean the filter, remove it from the pressure washer and rinse it under warm water.
4. Check the pressure washer pump:
The pressure washer pump can fail if it is not properly lubricated. To lubricate the pump, remove the pump cover and add a few drops of oil to the pump shaft.
5. Replace the pressure washer pump:
If the pressure washer pump is damaged or worn out, it will need to be replaced.
How to Fix a Troy Bilt Pressure Washer Pump
If you have tried troubleshooting the problem yourself and you are still having trouble, you may need to call a professional to fix the pressure washer pump. A professional will be able to diagnose the problem and make the necessary repairs.
Preventing Problems with Your Troy Bilt Pressure Washer Pump
You can help prevent problems with your Troy Bilt pressure washer pump by following these tips:
Use the pressure washer according to the manufacturer’s instructions:
Do not over-pressurize the pressure washer:
Clean the pressure washer filter regularly:
Lubricate the pressure washer pump regularly:
Store the pressure washer in a cool, dry place:
By following these tips, you can help extend the life of your Troy Bilt pressure washer pump and prevent costly repairs.
FAQs: Troy Bilt Pressure Washer Pump Not Working
Why is my Troy Bilt pressure washer pump not working?
There are a few possible reasons why your Troy Bilt pressure washer pump might not be working. Here are some of the most common causes:
The pump is not getting enough water: Make sure that the water supply to the pump is turned on and that the hose is not kinked or blocked.
The pump is clogged: The pump can become clogged with dirt, debris, or mineral deposits. To clean the pump, remove the inlet screen and flush the pump with water.
The pump is overheating: The pump can overheat if it is used for too long or if the water is too hot. To prevent the pump from overheating, allow it to cool down for a few minutes before using it again.
The pump is damaged: If the pump is damaged, it will need to be repaired or replaced.
How do I fix a Troy Bilt pressure washer pump that is not working?
To fix a Troy Bilt pressure washer pump that is not working, you will need to identify the cause of the problem. Once you have identified the cause, you can follow the steps below to fix the problem:
If the pump is not getting enough water, check to make sure that the water supply to the pump is turned on and that the hose is not kinked or blocked. If the hose is blocked, you can try clearing the blockage with a wire brush. If the water supply is turned off, turn it on and try the pressure washer again.
If the pump is clogged, you will need to remove the inlet screen and flush the pump with water. To remove the inlet screen, locate the inlet on the side of the pump and unscrew the cap. Remove the screen and rinse it under warm water. Be careful not to damage the screen. Once the screen is clean, replace it and screw the cap back on.
If the pump is overheating, allow it to cool down for a few minutes before using it again. If the pump continues to overheat, you may need to replace the pump.
If the pump is damaged, you will need to have it repaired or replaced.
How can I prevent my Troy Bilt pressure washer pump from not working?
There are a few things you can do to prevent your Troy Bilt pressure washer pump from not working:
Use the pressure washer according to the manufacturer’s instructions: This includes using the correct water pressure and not using the pressure washer for too long at a time.
Keep the pressure washer clean and free of debris: Make sure to clean the inlet screen regularly and flush the pump with water after each use.
Store the pressure washer in a cool, dry place: This will help to prevent the pump from overheating.
Have the pressure washer serviced regularly: This will help to identify and fix any potential problems before they become serious.
What are the signs of a bad Troy Bilt pressure washer pump?
There are a few signs that can indicate that your Troy Bilt pressure washer pump is bad. These signs include:
The pressure washer is not producing any pressure.
The pressure washer is making a loud noise.
The pressure washer is leaking water.
The pressure washer is overheating.
If you notice any of these signs, it is important to have the pressure washer serviced or repaired as soon as possible.
What is the best way to replace a Troy Bilt pressure washer pump?
To replace a Troy Bilt pressure washer pump, you will need to:
1. Turn off the water supply to the pressure washer and disconnect the hose.
2. Remove the old pump by unscrewing the bolts that hold it in place.
3. Install the new pump by reversing the steps above.
4. Reattach the hose and turn on the water supply to the pressure washer.
It is important to note that replacing a pressure washer pump can be a dangerous task. If you are not comfortable doing it yourself, it is best to have the work done by a qualified professional.
Also Read: Troy Bilt Pressure Washer Siphon Not Working
