Rigid Miter Saw Electric Brake Not Working A Quick Fix
Your Ridgid miter saw is a powerful tool that can make quick and accurate cuts. But what happens when the electric brake stops working This can be a major inconvenience, especially if you’re in the middle of a project.
In this blog post, I’ll show you how to quickly and easily fix a Ridgid miter saw electric brake that’s not working. I’ll also provide some tips on how to prevent this problem from happening in the future.
So if your Ridgid miter saw electric brake is acting up, read on for a quick fix!
So Ridgid Miter Saw Electric Brake Not Working
How to Fix a Ridgid Miter Saw Electric Brake That’s Not Working
1. Turn off the miter saw and unplug it from the power outlet.
2. Remove the two screws that hold the brake cover in place.
3. Remove the brake cover.
4. Inspect the brake assembly for damage. If the brake pads are worn or damaged, replace them.
5. If the brake assembly is not damaged, clean it with a dry cloth.
6. Reassemble the brake assembly and replace the brake cover.
7. Plug the miter saw back in and turn it on.
8. Test the brake to make sure it is working properly.
Rigid Miter Saw Electric Brake Not Working
Symptoms
If the electric brake on your Ridgid miter saw is not working, you may notice the following symptoms:
The saw blade does not stop spinning when you release the trigger
The saw blade continues to spin after you have turned off the saw
The saw blade makes a loud noise when you release the trigger
Causes
There are a few possible causes for a Ridgid miter saw electric brake not working. These include:
A faulty brake switch
A loose or damaged wiring harness
A problem with the brake motor
Solutions
To fix a Ridgid miter saw electric brake that is not working, you will need to identify the cause of the problem. Once you have identified the cause, you can follow the steps below to fix the problem.
Faulty Brake Switch
If the brake switch is faulty, you will need to replace it. To do this, follow these steps:
1. Turn off the saw and unplug it from the power outlet.
2. Remove the two screws that hold the brake switch in place.
3. Remove the old brake switch and install the new one.
4. Reattach the two screws that hold the brake switch in place.
5. Plug the saw back into the power outlet and turn it on.
Loose or Damaged Wiring Harness
If the wiring harness is loose or damaged, you will need to repair or replace it. To do this, follow these steps:
1. Turn off the saw and unplug it from the power outlet.
2. Locate the wiring harness that connects to the brake motor.
3. Inspect the wiring harness for any damage.
4. If the wiring harness is damaged, you will need to replace it.
5. If the wiring harness is loose, you will need to tighten the connections.
6. Plug the saw back into the power outlet and turn it on.
Problem with the Brake Motor
If the brake motor is not working, you will need to replace it. To do this, follow these steps:
1. Turn off the saw and unplug it from the power outlet.
2. Remove the two screws that hold the brake motor in place.
3. Remove the old brake motor and install the new one.
4. Reattach the two screws that hold the brake motor in place.
5. Plug the saw back into the power outlet and turn it on.
Troubleshooting Tips
If you are having trouble fixing your Ridgid miter saw electric brake, here are a few troubleshooting tips:
Make sure that the saw is turned off and unplugged from the power outlet before you begin troubleshooting.
Check the breaker box to make sure that the power is turned on.
Try resetting the saw by turning it off and then on again.
If the problem persists, contact a qualified technician for help.
Also Read THis: Ryobi Electric Pole Saw 8 Tested And Working
FAQs: Ridgid Miter Saw Electric Brake Not Working
Why is my Ridgid miter saw electric brake not working?
There are a few possible reasons why your Ridgid miter saw electric brake may not be working.
The brake may be disengaged: Make sure that the brake is engaged by pressing the button on the front of the saw.
The brake may be worn out: If the brake is old or has been used heavily, it may need to be replaced.
The brake may be damaged: If the brake has been damaged, it will need to be repaired or replaced.
The brake may be dirty: If the brake is dirty, it may not be able to function properly. Clean the brake with a dry cloth to remove any dirt or debris.
How do I fix my Ridgid miter saw electric brake?
To fix your Ridgid miter saw electric brake, you will need to identify the cause of the problem. Once you have identified the cause, you can take the appropriate steps to fix it.
If the brake is disengaged, simply press the button on the front of the saw to engage it.
If the brake is worn out, you will need to replace it. You can purchase a replacement brake from a hardware store or online retailer.
If the brake is damaged, you will need to have it repaired or replaced. You can contact Ridgid customer service for assistance.
If the brake is dirty, clean it with a dry cloth to remove any dirt or debris.
What are the safety risks of using a Ridgid miter saw with an electric brake that is not working?
If the electric brake on your Ridgid miter saw is not working, there are a number of safety risks that you should be aware of.
The saw blade could continue to rotate after you have stopped cutting: This could result in serious injury if you or someone else comes into contact with the blade.
The saw could be difficult to control: If the blade is not properly stopped, it could cause the saw to move in an unexpected direction, which could also result in serious injury.
The saw could overheat: If the blade is not properly stopped, it could continue to run and generate heat, which could damage the saw.
How can I prevent my Ridgid miter saw electric brake from failing?
There are a few things you can do to prevent your Ridgid miter saw electric brake from failing.
Regularly inspect the brake: Check the brake for signs of wear or damage, and replace it if necessary.
Keep the brake clean: Clean the brake with a dry cloth to remove any dirt or debris.
Don’t overload the saw: Don’t use the saw to cut materials that are too thick or heavy for the saw to handle.
Use the saw properly: Follow the instructions that came with the saw to ensure that you are using it properly.
What should I do if my Ridgid miter saw electric brake fails?
If your Ridgid miter saw electric brake fails, you should stop using the saw immediately and contact Ridgid customer service for assistance.
Ridgid customer service can help you determine the cause of the problem and provide you with instructions on how to fix it. If the brake cannot be repaired, Ridgid customer service can help you order a replacement brake.
