There’s nothing more frustrating than having a pressure washer that’s not working properly. And when it comes to Simpson pressure washers, one of the most common problems is the soap not working. This can be a major inconvenience, especially if you’re trying to clean something that’s really dirty.
In this guide, I’ll walk you through the steps to troubleshoot a Simpson pressure washer that’s not dispensing soap. I’ll cover everything from checking the soap container to clearing the soap nozzle. By the end of this guide, you’ll be able to get your pressure washer back up and running in no time.
Reasons Why Simpson Pressure Washer Soap Not Working
Reasons Why Simpson Pressure Washer Soap Not Working
Incorrect Soap Type
Simpson pressure washers are designed to use a specific type of soap. Using the wrong type of soap can cause the soap to not suds up properly or to clog the pressure washer.
Not Enough Soap
In order for the soap to work properly, you need to use enough of it. If you don’t use enough soap, the pressure washer will not be able to create enough suds to clean the surface.
Too Much Soap
Using too much soap can also cause problems. Too much soap can clog the pressure washer and make it difficult to clean the surface.
Dirty Soap Tank
If the soap tank is dirty, it can prevent the soap from sudsing up properly. Make sure to clean the soap tank regularly to prevent this problem.
Blocked Soap Nozzle
If the soap nozzle is blocked, it can prevent the soap from being sprayed out of the pressure washer. Clean the soap nozzle regularly to prevent this problem.
How to Troubleshoot And Fix: Simpson Pressure Washer Soap Not Working
Symptoms
There are a few different symptoms that you may experience if your Simpson pressure washer soap is not working properly. These include:
The soap is not coming out of the wand when you press the trigger.
The soap is coming out of the wand in a weak stream.
The soap is coming out of the wand in a frothy or bubbly consistency.
The soap is not sudsing up properly.
Causes
There are a number of different things that could cause your Simpson pressure washer soap to not work properly. These include:
The soap dispenser is clogged:
This is the most common cause of soap not working properly. The soap dispenser can become clogged with dirt, debris, or soap scum.
The soap is too thick:
If the soap is too thick, it will not be able to flow through the soap dispenser properly.
The soap is too thin:
If the soap is too thin, it will not create enough suds.
The pressure washer is not producing enough pressure:
If the pressure washer is not producing enough pressure, it will not be able to push the soap through the wand.
Troubleshooting
To troubleshoot the problem of your Simpson pressure washer soap not working properly, follow these steps:
1. Check the soap dispenser:
Make sure that the soap dispenser is not clogged. To do this, remove the soap dispenser from the pressure washer and clean it with a brush or a rag.
2. Check the soap:
Make sure that the soap is not too thick or too thin. If the soap is too thick, you can thin it out by adding water. If the soap is too thin, you can thicken it by adding more soap.3. Check the pressure washer:
Make sure that the pressure washer is producing enough pressure. To do this, check the pressure gauge on the pressure washer. The pressure should be between 2,000 and 3,000 PSI.
If you have checked all of these things and the problem persists, you may need to contact a qualified technician for help.
Prevention
To prevent problems with your Simpson pressure washer soap, follow these tips:
Use the correct type of soap:
Make sure that you are using a soap that is specifically designed for pressure washers.
Use the correct amount of soap:
Do not use too much soap, as this can clog the soap dispenser.
Clean the soap dispenser regularly:
Clean the soap dispenser every time you use the pressure washer. This will help to prevent the dispenser from becoming clogged.
Store the pressure washer in a cool, dry place:
Storing the pressure washer in a cool, dry place will help to prevent the soap from freezing or becoming too thick.
Also Read THis: Simpson Pressure Washer Trigger Not Working
FAQs: Simpson Pressure Washer Soap Not Working
Why is my Simpson pressure washer soap not working?
There are a few reasons why your Simpson pressure washer soap might not be working. Here are some of the most common:
The soap is not compatible with your pressure washer: Make sure that you are using a soap that is specifically designed for pressure washers. Some soaps are designed for use with cold water, while others are designed for use with hot water. If you are using the wrong type of soap, it will not work properly.
The soap is not being applied correctly: Make sure that you are applying the soap to the surface in a thin, even layer. If you apply too much soap, it will not be able to rinse off properly.
The pressure washer is not set to the correct pressure: The pressure washer needs to be set to a high enough pressure to remove the soap from the surface. If the pressure is too low, the soap will not be able to rinse off properly.
The water temperature is not correct: The water temperature needs to be hot enough to dissolve the soap. If the water is too cold, the soap will not be able to rinse off properly.
How do I fix my Simpson pressure washer soap not working?
If your Simpson pressure washer soap is not working, you can try the following steps to fix the problem:
1. Check the compatibility of the soap: Make sure that you are using a soap that is specifically designed for pressure washers.
2. Apply the soap correctly: Make sure that you are applying the soap to the surface in a thin, even layer.
3. Set the pressure washer to the correct pressure: The pressure washer needs to be set to a high enough pressure to remove the soap from the surface.
4. Check the water temperature: The water temperature needs to be hot enough to dissolve the soap.
If you have tried all of these steps and your Simpson pressure washer soap is still not working, you may need to contact a qualified technician for help.
What type of soap should I use for my Simpson pressure washer?
The best type of soap to use for your Simpson pressure washer will depend on the type of surface you are cleaning. Here are some general tips:
For cleaning concrete, brick, or other hard surfaces, use a pressure washer soap that is specifically designed for these surfaces. These soaps are typically formulated to remove dirt, grime, and other tough stains without damaging the surface.
For cleaning cars, boats, or other vehicles, use a pressure washer soap that is specifically designed for vehicles. These soaps are typically formulated to remove dirt, grease, and other automotive grime without damaging the paint or other finishes.
For cleaning decks, patios, or other outdoor surfaces, use a pressure washer soap that is specifically designed for these surfaces. These soaps are typically formulated to remove dirt, mildew, and other outdoor stains without damaging the surface.
How do I apply soap to my Simpson pressure washer?
To apply soap to your Simpson pressure washer, follow these steps:
1. Turn on the pressure washer and allow it to warm up for a few minutes.
2. Attach the soap dispenser to the pressure washer.
3. Add soap to the soap dispenser.
4. Turn on the soap dispenser.
5. Point the pressure washer at the surface you want to clean and spray it with soap.
6. Rinse the surface with water to remove the soap.
How do I set the pressure washer to the correct pressure?
To set the pressure washer to the correct pressure, follow these steps:
1. Turn on the pressure washer and allow it to warm up for a few minutes.
2. Find the pressure control knob on the pressure washer.
3. Turn the knob to adjust the pressure.
4. Test the pressure by spraying the pressure washer on a piece of cardboard.
5. Adjust the pressure until you are satisfied with the results.
What is the correct water temperature for using soap with a pressure washer?
The correct water temperature for using soap with a pressure washer will depend on the type of soap you are using. Here are some general tips:
For soaps that are specifically designed for use with hot water, the water temperature should be between 120°F and 140°F.
For soaps that are not specifically designed for use with hot water, the water temperature should be between 80°F and 100°F.
If you are not sure what water temperature to use, it is
