Your Stihl Chainsaw Won’t Start Here’s Why
Your Stihl chainsaw is a powerful tool that can make quick work of any cutting job. But when it won’t start, it can be a real pain. There are a few common reasons why your chainsaw might not be starting, and in this blog post, we’ll take a look at each one in detail. We’ll also provide some tips on how to troubleshoot and fix the problem so you can get back to work as soon as possible.
Why My Stihl Chainsaw Won’T Start
There are many reasons why your Stihl chainsaw might not start. Here are a few of the most common:
The chainsaw is out of gas:
This is the most common reason why a chainsaw won’t start. Make sure the chainsaw is full of gas and that the gas cap is on tightly.
The spark plug is fouled:
A fouled spark plug can prevent the chainsaw from starting. Remove the spark plug and clean it with a wire brush. If the spark plug is damaged, replace it.
The carburetor is dirty:
A dirty carburetor can also prevent the chainsaw from starting. Clean the carburetor according to the manufacturer’s instructions.
The air filter is dirty:
A dirty air filter can restrict airflow to the carburetor, which can prevent the chainsaw from starting. Clean the air filter according to the manufacturer’s instructions.
The chainsaw is not getting spark:
If the chainsaw is not getting spark, the spark plug wire may be loose or damaged. Check the spark plug wire and make sure it is connected tightly to the spark plug. If the spark plug wire is damaged, replace it.
Why Won’t My Stihl Chainsaw Start?
There are a few reasons why your Stihl chainsaw might not start.
The chainsaw is not getting enough fuel:
Make sure that the fuel tank is full and that the fuel line is clear of any obstructions.
The spark plug is not firing:
Check the spark plug for damage and clean or replace it if necessary.
The air filter is dirty:
Clean the air filter to ensure that the engine is getting enough air.
The carburetor is not adjusted properly:
Have the carburetor adjusted by a qualified technician.
The engine is seized:
If the engine is seized, it will need to be repaired or replaced.
How to Start a Stihl Chainsaw
1. Make sure that the chainsaw is in the off position.
2. Pull the choke lever to the choke position.
3. Press the primer bulb several times.
4. Move the throttle lever to the fast position.
5. Grasp the chainsaw with both hands and pull the starter rope until the engine starts.
Troubleshooting Tips
If your Stihl chainsaw still won’t start after following these steps, here are a few troubleshooting tips:
Check the spark plug gap. The spark plug gap should be between 0.020 and 0.025 inches.
Check the fuel filter. The fuel filter should be clean and free of debris.
Check the air filter. The air filter should be clean and free of debris.
Check the carburetor. The carburetor may need to be adjusted or cleaned.
If the engine is still seized, it will need to be repaired or replaced.
Contact a Qualified Technician
If you are unable to troubleshoot the problem yourself, contact a qualified Stihl chainsaw technician for assistance.
Also Read THis: Why Stihl Chainsaw Won’T Start
FAQs: Why My Stihl Chainsaw Won’t Start
Why won’t my Stihl chainsaw start?
There are a few possible reasons why your Stihl chainsaw won’t start. Here are some of the most common causes:
The chainsaw is out of gas: This is the most common reason why a chainsaw won’t start. Make sure that the chainsaw is filled with gas and that the gas cap is properly tightened.
The spark plug is fouled: A fouled spark plug can prevent the chainsaw from starting. To check the spark plug, remove it from the chainsaw and inspect it for signs of fouling. If the spark plug is fouled, clean it with a spark plug cleaner or replace it with a new one.
The carburetor is dirty: A dirty carburetor can also prevent the chainsaw from starting. To clean the carburetor, you will need to remove it from the chainsaw and disassemble it. Once the carburetor is disassembled, clean all of the parts with a carburetor cleaner.
The air filter is dirty: A dirty air filter can restrict the flow of air to the carburetor, which can prevent the chainsaw from starting. To clean the air filter, remove it from the chainsaw and rinse it with warm water. Allow the air filter to dry completely before reinstalling it.
The chainsaw is not getting spark: If the chainsaw is not getting spark, it will not start. To check for spark, remove the spark plug from the chainsaw and hold it against the cylinder head. Crank the engine over and look for a spark at the spark plug. If there is no spark, you will need to troubleshoot the ignition system.
How do I fix a Stihl chainsaw that won’t start?
Once you have determined the cause of the problem, you can fix the chainsaw by following these steps:
If the chainsaw is out of gas, fill it up with gas and tighten the gas cap:
If the spark plug is fouled, clean it with a spark plug cleaner or replace it with a new one:
If the carburetor is dirty, clean it with a carburetor cleaner:
If the air filter is dirty, clean it with warm water and allow it to dry completely before reinstalling it:
If the chainsaw is not getting spark, troubleshoot the ignition system:
For more detailed instructions on how to fix a Stihl chainsaw that won’t start, consult your chainsaw’s owner’s manual.
What should I do if my Stihl chainsaw starts but dies immediately?
If your Stihl chainsaw starts but dies immediately, there are a few possible causes:
The chainsaw is out of gas: Make sure that the chainsaw is filled with gas and that the gas cap is properly tightened.
The spark plug is fouled: A fouled spark plug can prevent the chainsaw from running properly. To check the spark plug, remove it from the chainsaw and inspect it for signs of fouling. If the spark plug is fouled, clean it with a spark plug cleaner or replace it with a new one.
The carburetor is dirty: A dirty carburetor can also prevent the chainsaw from running properly. To clean the carburetor, you will need to remove it from the chainsaw and disassemble it. Once the carburetor is disassembled, clean all of the parts with a carburetor cleaner.
The air filter is dirty: A dirty air filter can restrict the flow of air to the carburetor, which can prevent the chainsaw from running properly. To clean the air filter, remove it from the chainsaw and rinse it with warm water. Allow the air filter to dry completely before reinstalling it.
The chainsaw is not getting spark: If the chainsaw is not getting spark, it will not run properly. To check for spark, remove the spark plug from the chainsaw and hold it against the cylinder head. Crank the engine over and look for a spark at the spark plug. If there is no spark, you will need to troubleshoot the ignition system.
What is the difference between a Stihl chainsaw and a Husqvarna chainsaw?
Stihl and Husqvarna are two of the most popular brands of chainsaws on the market. Both brands offer a wide range of chainsaws to choose from, so it can be difficult to decide which one is right for you. Here is a brief comparison of Stihl and Husqvarna chainsaws to help you make a decision:
Stihl Chainsaw:
Pros:
Stihl chainsaws are known for their durability and reliability.
Stihl chainsaws are also known for their power and performance.
