Stihl Chainsaw Won’t Start
Your Stihl chainsaw is a powerful tool that can make quick work of any cutting job. But when it won’t start, it can be a major pain. There are a number of reasons why your Stihl chainsaw might not be starting, and in this blog post, we’ll take a look at some of the most common causes and how to fix them. We’ll also provide some tips on how to prevent your chainsaw from starting in the future.
Why Stihl Chainsaw Won’T Start
There are many reasons why a Stihl chainsaw might not start. Here are a few of the most common:
The chainsaw is not getting enough fuel:
Make sure that the fuel tank is full and that the fuel line is clear.
The chainsaw is not getting enough air:
Check the air filter and make sure that it is clean.
The spark plug is not firing:
Check the spark plug and make sure that it is in good condition and that the gap is set correctly.
The chainsaw is flooded:
If the chainsaw has been sitting for a long time, it may be flooded with fuel. Try to clear the carburetor by turning the chainsaw over a few times without the spark plug installed.
The chainsaw is not being used correctly:
Make sure that you are using the chainsaw in accordance with the manufacturer’s instructions.
Why Stihl Chainsaw Won’t Start
There are a few reasons why your Stihl chainsaw might not start.
The chainsaw is not getting enough fuel:
Make sure that the fuel tank is full and that the fuel line is clear of any obstructions.
The chainsaw is not getting enough air:
Check the air filter to make sure that it is clean and free of debris.
The spark plug is fouled:
Remove the spark plug and clean it with a spark plug cleaner. If the spark plug is damaged, replace it with a new one.
The carburetor is out of adjustment:
If you have adjusted the carburetor yourself, it is possible that you have adjusted it incorrectly. If you are not sure how to adjust the carburetor, take your chainsaw to a qualified service technician.
The engine is seized:
If the engine is seized, it will not be able to start. A seized engine is usually caused by a lack of lubrication. To prevent the engine from seizing, make sure that you are using the correct type of oil and that you are changing the oil regularly.
Troubleshooting Tips
If your Stihl chainsaw is not starting, here are a few troubleshooting tips that you can try:
Check the fuel tank:
Make sure that the fuel tank is full and that the fuel line is clear of any obstructions.
Check the air filter:
Remove the air filter and clean it with a spark plug cleaner. If the air filter is damaged, replace it with a new one.
Check the spark plug:
Remove the spark plug and clean it with a spark plug cleaner. If the spark plug is damaged, replace it with a new one.
Adjust the carburetor:
If you have adjusted the carburetor yourself, it is possible that you have adjusted it incorrectly. If you are not sure how to adjust the carburetor, take your chainsaw to a qualified service technician.
Check the engine:
If the engine is seized, it will not be able to start. A seized engine is usually caused by a lack of lubrication. To prevent the engine from seizing, make sure that you are using the correct type of oil and that you are changing the oil regularly.
If you are still having trouble starting your Stihl chainsaw, you should take it to a qualified service technician.
Also Read THis: Why Won’T Chainsaw Start
FAQs: Why Stihl Chainsaw Won’t Start
Why won’t my Stihl chainsaw start?
There are a few possible reasons why your Stihl chainsaw won’t start. Here are some of the most common causes:
The chainsaw is not getting fuel: Make sure that the fuel tank is full and that the fuel valve is open. If the fuel tank is empty, fill it up with fresh fuel. If the fuel valve is closed, open it.
The chainsaw is not getting spark: Check the spark plug to make sure that it is properly installed and that the electrodes are clean. If the spark plug is damaged or fouled, replace it with a new one.
The chainsaw is flooded: If the chainsaw is flooded, it will not start because the carburetor is filled with too much fuel. To clear the carburetor, turn the chainsaw off and let it sit for a few minutes. Then, remove the spark plug and crank the engine a few times to clear the excess fuel from the carburetor.
The chainsaw is out of compression: If the chainsaw is out of compression, it will not start because the piston cannot move up and down in the cylinder. To check the compression, remove the spark plug and attach a compression gauge to the spark plug hole. Crank the engine and read the compression reading. If the compression reading is low, you will need to have the chainsaw serviced.
The chainsaw is not getting enough air: If the chainsaw is not getting enough air, it will not start because the engine will not be able to run properly. To check the air filter, remove it and clean it with a brush. If the air filter is damaged or clogged, replace it with a new one.
How do I fix a Stihl chainsaw that won’t start?
Once you have identified the cause of the problem, you can fix the Stihl chainsaw that won’t start by following these steps:
If the chainsaw is not getting fuel, fill up the fuel tank with fresh fuel and open the fuel valve.
If the chainsaw is not getting spark, check the spark plug to make sure that it is properly installed and that the electrodes are clean. If the spark plug is damaged or fouled, replace it with a new one.
If the chainsaw is flooded, turn the chainsaw off and let it sit for a few minutes. Then, remove the spark plug and crank the engine a few times to clear the excess fuel from the carburetor.
If the chainsaw is out of compression, you will need to have the chainsaw serviced.
If the chainsaw is not getting enough air, remove the air filter and clean it with a brush. If the air filter is damaged or clogged, replace it with a new one.
What should I do if my Stihl chainsaw still won’t start?
If you have tried all of the above steps and your Stihl chainsaw still won’t start, you should take it to a qualified service center for further diagnosis and repair.
How can I prevent my Stihl chainsaw from not starting?
There are a few things you can do to prevent your Stihl chainsaw from not starting:
Keep the fuel tank full: A full fuel tank will help to prevent the chainsaw from flooding.
Clean the spark plug regularly: A dirty spark plug can cause the chainsaw to not start.
Store the chainsaw in a cool, dry place: Extreme temperatures can damage the chainsaw and cause it to not start.
Inspect the chainsaw regularly for damage: A damaged chainsaw can be dangerous and may not start properly.
Have the chainsaw serviced regularly: A regular service will help to keep the chainsaw in good working order and prevent it from not starting.
