Simpson pressure washer siphon not working. Check the suction hose for kinks or clogs. Make sure the water inlet is turned on and the pressure washer is turned on. If the siphon still doesn’t work, replace the suction hose.
If your Simpson pressure washer soap is not working, it could be due to a number of reasons. Here are a few possible causes and solutions
The soap is too thick. Dilute the soap with water according to the manufacturer’s instructions.
The soap is not compatible with your pressure washer. Check the manufacturer’s recommendations for compatible soaps.
The soap is not being sprayed properly. Make sure the soap nozzle is clean and properly adjusted.
The pressure washer is not generating enough pressure. Check the pressure washer’s output pressure and adjust it as needed.
Simpson pressure washer trigger not working
– Check if the trigger is clogged.
– Check if the trigger is stuck.
– Check if the trigger is damaged.
– Check if the pressure washer is turned on.
If your Snap-on electric pressure washer 870905 is not working, it may be due to a problem with the pump, motor, or hose. To troubleshoot the issue, first check the pump for leaks and make sure that the motor is running. If the pump is not leaking and the motor is running, then the problem may be with the hose. Try replacing the hose and see if that fixes the issue.
Snap-on pressure washer soap dispenser not working. Check if the soap container is full and properly inserted. Clean the soap nozzle. Check the pressure washer’s hose for kinks or clogs. If the problem persists, contact Snap-on customer service.
Snap-On 1650 PSI Pressure Washer Not Working
The Snap-On 1650 PSI pressure washer is not working. The following troubleshooting steps have been taken
1. The pressure washer is plugged in and turned on.
2. The water supply is turned on.
3. The pressure washer is primed.
4. The trigger is pulled.
The pressure washer is still not working.
Snap-on electric pressure washer not working
If your Snap-on electric pressure washer is not working, here are a few things to check
Make sure the power cord is plugged in and turned on.
Check the water supply to make sure it is turned on and flowing.
Check the pressure washer filter to make sure it is clean.
If the pressure washer is still not working, you may need to have it serviced.
Soap dispenser on pressure washer not working
– Check if the soap dispenser is plugged in and turned on.
– Check if the soap dispenser is clogged.
– Try a different soap.
– Contact the manufacturer for help.
Soap is not working on Sun Joe pressure washer
Make sure the soap tank is full and the soap is mixed with water according to the manufacturer’s instructions.
Check the spray nozzle to make sure it is clean and not clogged.
Try using a different type of soap or a different dilution ratio.
If the problem persists, contact the manufacturer for assistance.
Soap not working with mtm pressure washer. Possible causes
Not enough soap
Wrong type of soap
Soap is too thick
Soap is too old
Soap is not compatible with the pressure washer
Solutions
Add more soap
Use a different type of soap
Thin the soap with water
Use fresh soap
Use a soap that is compatible with the pressure washer