Husqvarna 345 Chainsaw Oiler Not Working

As a chainsaw owner, there’s nothing more frustrating than having your saw not work properly. One of the most common problems that can occur is when the oiler stops working. This can be a major inconvenience, as it can lead to damage to your saw and the wood you’re cutting.

In this troubleshooting guide, I’ll walk you through the steps to diagnose and resolve the issue of a . I’ll also provide some tips on how to prevent this problem from happening in the future.

By following these steps, you can quickly and easily get your saw back up and running, so you can get back to cutting wood.

Most Common Reasons Of Husqvarna 345 Chainsaw Oiler Not Working

Most Common Reasons Of Husqvarna 345 Chainsaw Oiler Not Working

1. Oiler Hose Is Clogged

The oiler hose can become clogged with sawdust or other debris, preventing oil from reaching the chain. To fix this, remove the oiler hose from the chainsaw and clean it with a wire brush.

2. Oiler Pump Is Damaged

The oiler pump can become damaged if it is run dry or if it is subjected to too much pressure. If the oiler pump is damaged, it will need to be replaced.

3. Oiler Orifice Is Clogged

The oiler orifice can become clogged with sawdust or other debris, preventing oil from flowing out of the orifice and onto the chain. To fix this, remove the oiler orifice from the chainsaw and clean it with a small drill bit or needle.

4. Oil Level Is Low

If the oil level in the chainsaw is low, the oiler will not be able to pump enough oil to the chain. To fix this, add oil to the chainsaw until the oil level is up to the full mark.

5. Oiler Is Not Enabled

On some chainsaws, the oiler can be disabled by a switch. If the oiler is disabled, it will not pump any oil to the chain. To fix this, make sure that the oiler switch is turned on.

How to Troubleshoot: Husqvarna 345 Chainsaw Oiler Not Working

Symptoms of a Husqvarna 345 Chainsaw Oiler Not Working

There are a few symptoms that may indicate that the oiler on your Husqvarna 345 chainsaw is not working properly. These include:

The chain is not being lubricated properly, which can lead to overheating and damage to the chain and bar.
The oiler is leaking oil, which can be a fire hazard.
The oiler is making a loud noise, which may indicate that it is malfunctioning.

Troubleshooting a Husqvarna 345 Chainsaw Oiler

If you suspect that the oiler on your Husqvarna 345 chainsaw is not working properly, you can troubleshoot the problem by following these steps:

1. Check the oil level. The first thing you should do is check the oil level in the oiler. To do this, remove the oil cap and look inside the oiler. The oil level should be between the full and add marks on the oiler. If the oil level is low, add oil to the oiler until it reaches the full mark.
2. Check the oil filter. The next thing you should check is the oil filter. The oil filter is located on the bottom of the oiler. To check the oil filter, remove the oil filter cap and remove the oil filter. Inspect the oil filter for any damage or debris. If the oil filter is damaged or clogged, replace it with a new oil filter.
3. Check the oil line. The next thing you should check is the oil line. The oil line runs from the oiler to the chain. To check the oil line, disconnect the oil line from the oiler and the chain. Inspect the oil line for any damage or kinks. If the oil line is damaged, replace it with a new oil line.
4. Check the oil pump. The final thing you should check is the oil pump. The oil pump is located inside the engine. To check the oil pump, remove the oil pump cover. Inspect the oil pump for any damage or debris. If the oil pump is damaged, replace it with a new oil pump.

Preventing Husqvarna 345 Chainsaw Oiler Problems

You can help prevent problems with the oiler on your Husqvarna 345 chainsaw by following these tips:

Keep the oil level in the oiler topped off. This will help to ensure that the chain is properly lubricated and that the oiler does not overheat.
Change the oil filter regularly. The oil filter helps to keep debris out of the oiler. Changing the oil filter regularly will help to prevent the oiler from becoming clogged.
Inspect the oil line regularly. The oil line can become damaged or kinked over time. Inspecting the oil line regularly will help to catch any damage before it causes problems.
Maintain the oil pump properly. The oil pump is a vital part of the oiler system. Maintaining the oil pump properly will help to ensure that it continues to function properly.

By following these tips, you can help prevent problems with the oiler on your Husqvarna 345 chainsaw.

FAQs: Husqvarna 345 Chainsaw Oiler Not Working

Why is my Husqvarna 345 chainsaw oiler not working?

There are a few possible reasons why your Husqvarna 345 chainsaw oiler may not be working. Here are some of the most common causes:

The oiler is not getting enough oil. Make sure that the oil tank is full and that the oil line is not kinked or blocked.
The oiler is clogged. The oiler can become clogged with sawdust or other debris. To clean the oiler, remove the oiler cover and clean the inside of the oiler with a small brush.
The oiler is not adjusted correctly. The oiler may not be adjusted correctly to deliver the correct amount of oil to the chain. To adjust the oiler, follow the instructions in your chainsaw’s owner’s manual.
The oiler is defective. If the oiler is defective, it will need to be replaced.

How do I fix my Husqvarna 345 chainsaw oiler?

To fix your Husqvarna 345 chainsaw oiler, you will need to identify the cause of the problem and then take the appropriate steps to fix it. Here are some steps to help you troubleshoot the problem:

1. Check the oil tank to make sure that it is full. If the oil tank is empty, fill it with the correct type of oil.
2. Check the oil line to make sure that it is not kinked or blocked. If the oil line is kinked or blocked, straighten it out or remove the obstruction.
3. Clean the oiler. Remove the oiler cover and clean the inside of the oiler with a small brush.
4. Adjust the oiler. Follow the instructions in your chainsaw’s owner’s manual to adjust the oiler.
5. Replace the oiler. If the oiler is defective, it will need to be replaced.

What happens if my Husqvarna 345 chainsaw oiler is not working?

If your Husqvarna 345 chainsaw oiler is not working, it can cause a number of problems. Here are some of the potential problems that can occur if your oiler is not working:

The chain can become dry and overheat. This can damage the chain and make it more likely to break.
The chain can become dull more quickly. This can make it more difficult to cut through wood and can lead to a decrease in productivity.
The chain can skip or jump. This can be dangerous and can lead to injuries.

How can I prevent my Husqvarna 345 chainsaw oiler from not working?

There are a few things that you can do to prevent your Husqvarna 345 chainsaw oiler from not working:

Keep the oil tank full. Make sure that the oil tank is always full of the correct type of oil.
Inspect the oil line regularly. Check the oil line for kinks or obstructions and replace it if necessary.
Clean the oiler regularly. Clean the oiler regularly to prevent it from becoming clogged.
Adjust the oiler regularly. Follow the instructions in your chainsaw’s owner’s manual to adjust the oiler.

Where can I get help if my Husqvarna 345 chainsaw oiler is not working?

If you are having trouble with your Husqvarna 345 chainsaw oiler, you can get help from a number of sources. Here are a few options:

Contact Husqvarna customer service. Husqvarna customer service can provide you with assistance with your chainsaw.
Visit a Husqvarna dealer. A Husqvarna dealer can inspect your chainsaw and make repairs if necessary.
Read your chainsaw’s owner’s manual. Your chainsaw’s owner’s manual contains information on how to maintain your chainsaw, including how to maintain the oiler.

Next Post You May Like: Husqvarna 350 Chainsaw Oiler Not Working