How To Check If Poulan Chainsaw Oiler Not Working

As a chainsaw owner, there are few things more frustrating than having your saw not work properly. One of the most common problems is a chainsaw oiler that is not working properly. This can be a major inconvenience, as it can lead to the saw overheating and eventually becoming damaged. In this guide, we will discuss how to check if your Poulan chainsaw oiler is not working and how to fix the problem. We will also provide some tips on how to prevent this problem from happening in the future.

Why is it important to check if your Poulan chainsaw oiler is working properly

There are a few reasons why it is important to check if your Poulan chainsaw oiler is working properly. First, if the oiler is not working properly, it can lead to the saw overheating. This can damage the saw and make it unsafe to use. Second, if the oiler is not working properly, it can cause the saw to run inefficiently. This can lead to the saw using more gas and oil than necessary. Third, if the oiler is not working properly, it can cause the saw to produce more smoke. This can be a nuisance for the user and can also be a fire hazard.

Most Common Reasons Of How To Check If Poulan Chainsaw Oiler Not Working

1. The Oiler Is Not Connected Properly

The first thing to check is whether the oiler is connected properly to the chainsaw. Make sure that the oiler is securely attached to the bar and that the oil line is not kinked or damaged.

2. The Oiler Is Clogged

If the oiler is clogged, it will not be able to pump oil to the bar. To check for a clog, remove the oiler from the chainsaw and clean it with a solvent.

3. The Oiler Is Not Getting Enough Oil

If the oiler is not getting enough oil, it will not be able to pump oil to the bar. Make sure that the oil tank is full and that the oil line is not kinked or damaged.

4. The Oiler Is Not Working Properly

If the oiler is not working properly, it will not be able to pump oil to the bar. If you have checked all of the other possible causes and the oiler is still not working, you may need to replace it.

How to Check if Poulan Chainsaw Oiler Not Working

Symptoms of a Poulan Chainsaw Oiler Not Working

There are a few signs that can indicate that your Poulan chainsaw oiler is not working properly. These include:

The saw is running hot. If the saw is running hot, it could be a sign that the oiler is not providing enough lubrication to the chain. This can cause the chain to wear out prematurely and can also lead to other problems, such as the saw seizing up.
The chain is smoking. If the chain is smoking, it could be a sign that the oiler is not providing enough lubrication to the chain. This can cause the chain to overheat and can also lead to other problems, such as the chain breaking.
The chain is skipping. If the chain is skipping, it could be a sign that the oiler is not providing enough lubrication to the chain. This can cause the chain to lose its grip on the wood and can also lead to other problems, such as the chain breaking.
The bar is covered in oil. If the bar is covered in oil, it could be a sign that the oiler is leaking. This can cause the saw to run inefficiently and can also lead to other problems, such as the saw seizing up.

How to Troubleshoot a Poulan Chainsaw Oiler

If you suspect that your Poulan chainsaw oiler is not working properly, you can troubleshoot the problem by following these steps:

1. Check the oil level. The first thing you should do is check the oil level in the saw. If the oil level is low, it could be a sign that the oiler is not working properly. To check the oil level, remove the oil cap and check the oil level on the sight glass. The oil level should be between the full and add marks.
2. Check the oil filter. The next thing you should check is the oil filter. The oil filter is located on the bottom of the saw, near the bar oil tank. To check the oil filter, remove the oil filter cover and remove the oil filter. Inspect the oil filter for signs of wear or damage. If the oil filter is dirty or damaged, it should be replaced.
3. Check the oil pump. The oil pump is located inside the saw, near the bar oil tank. To check the oil pump, remove the oil cap and look inside the saw. You should be able to see the oil pump. If the oil pump is not moving, it could be a sign that the oil pump is not working properly.
4. Check the oil line. The oil line is a hose that connects the oil pump to the bar oil nozzle. To check the oil line, follow the oil line from the oil pump to the bar oil nozzle. Inspect the oil line for signs of wear or damage. If the oil line is damaged, it should be replaced.
5. Check the bar oil nozzle. The bar oil nozzle is located on the bar, near the chain. To check the bar oil nozzle, remove the bar oil nozzle cover and inspect the bar oil nozzle. The bar oil nozzle should be clean and free of debris. If the bar oil nozzle is clogged, it should be cleaned.

How to Fix a Poulan Chainsaw Oiler

If you have determined that your Poulan chainsaw oiler is not working properly, you can fix the problem by following these steps:

1. Replace the oil filter. If the oil filter is dirty or damaged, it should be replaced. To replace the oil filter, remove the oil filter cover and remove the old oil filter. Then, install the new oil filter.
2. Replace the oil pump. If the oil pump is not moving, it could be a sign that the oil pump is not working properly. To replace the oil pump, you will need to remove the saw’s crankcase. Once the crankcase is removed, you can remove the oil pump and install the new oil pump.
3. Replace the oil line. If the oil line is damaged, it should be replaced. To replace the oil line, you will need to disconnect the oil line from the oil pump and the bar oil nozzle. Then, you can install the new oil line.
4. Clean the bar oil nozzle. If the bar oil nozzle is clogged, it should be cleaned. To clean the bar oil nozzle, remove the bar oil nozzle cover and use a small brush to clean the bar oil nozzle.

Preventing Poulan Chainsaw Oiler Problems

You can help prevent Poulan chainsaw oil

FAQs: How to Check if Poulan Chainsaw Oiler Not Working

How do I know if my Poulan chainsaw oiler is not working?

There are a few ways to check if your Poulan chainsaw oiler is not working.

Check the oil level. If the oil level is low, it could be a sign that the oiler is not working properly. To check the oil level, remove the oil cap and look at the dipstick. The oil level should be between the full and add marks.
Check the oil line. The oil line connects the oil tank to the chainsaw’s bar and chain. If the oil line is kinked or damaged, it could prevent oil from reaching the bar and chain. To check the oil line, look for any kinks or damage. If you find any, replace the oil line.
Check the oil pump. The oil pump is responsible for pumping oil from the tank to the bar and chain. If the oil pump is not working properly, it could prevent oil from reaching the bar and chain. To check the oil pump, remove the oil cap and start the chainsaw. The oil pump should be pumping oil onto the bar and chain. If you don’t see any oil, the oil pump may be faulty.

What are the symptoms of a Poulan chainsaw oiler not working?

There are a few symptoms that may indicate that your Poulan chainsaw oiler is not working properly.

The chain is not getting lubricated. If the chain is not getting lubricated, it will become hot and start to smoke. The chain may also start to skip or bind.
The oil level is low. If the oil level is low, it could be a sign that the oiler is not working properly. To check the oil level, remove the oil cap and look at the dipstick. The oil level should be between the full and add marks.
The oil pump is not working. If the oil pump is not working properly, it could prevent oil from reaching the bar and chain. To check the oil pump, remove the oil cap and start the chainsaw. The oil pump should be pumping oil onto the bar and chain. If you don’t see any oil, the oil pump may be faulty.

How do I fix a Poulan chainsaw oiler that is not working?

If your Poulan chainsaw oiler is not working, there are a few things you can do to try to fix it.

Check the oil level. If the oil level is low, add oil to the tank until it reaches the full mark.
Check the oil line. Look for any kinks or damage to the oil line. If you find any, replace the oil line.
Check the oil pump. Remove the oil cap and start the chainsaw. The oil pump should be pumping oil onto the bar and chain. If you don’t see any oil, the oil pump may be faulty. To fix the oil pump, you will need to take the chainsaw to a qualified technician.

What are the safety risks of a Poulan chainsaw oiler not working?

A Poulan chainsaw oiler that is not working properly can pose a number of safety risks, including:

Fire. If the chain is not getting lubricated, it will become hot and start to smoke. The chain may also start to skip or bind. This can create a fire hazard.
Personal injury. If the chain is not getting lubricated, it will become more difficult to control. This can increase the risk of personal injury.
Damage to the chainsaw. If the chain is not getting lubricated, it will wear out faster. This can damage the chainsaw and shorten its lifespan.

How can I prevent a Poulan chainsaw oiler from not working?

There are a few things you can do to prevent your Poulan chainsaw oiler from not working.

Check the oil level regularly. Make sure that the oil level is between the full and add marks on the dipstick.
Inspect the oil line regularly. Look for any kinks or damage to the oil line. If you find any, replace the oil line.
Clean the oil pump regularly. The oil pump can become clogged with dirt and debris. To clean the oil pump, remove the oil cap and pour a small amount of solvent into the oil tank. Start the chainsaw and let it run for a few minutes. The solvent will help to loosen the

Next Post You May Like: Husqvarna 345 Chainsaw Oiler Not Working

Poulan Chainsaw Oiler Not Working? Here’s How to Check