Husqvarna 350 Chainsaw Oiler Not Working

As a chainsaw owner, there are few things more frustrating than having your saw not oil properly. Not only can it lead to damage to the saw itself, but it can also be a safety hazard. If the chain isn’t properly lubricated, it can become hot and dangerous to use.

If you’re experiencing problems with your , you’re not alone. This is a common issue that can be easily diagnosed and resolved. In this guide, we’ll walk you through the steps to troubleshoot the problem and get your saw back up and running in no time.

We understand that your time is valuable, so we’ve kept this guide as concise as possible. However, if you need more detailed instructions or have any questions, please don’t hesitate to contact us. We’re here to help!

Most Common Reasons Of Husqvarna 350 Chainsaw Oiler Not Working

No Oil in the Tank

The most common reason for a Husqvarna 350 chainsaw oiler not working is that there is no oil in the tank. Make sure the tank is full and that the oil level is between the MIN and MAX marks on the side of the tank.

Clogged Oil Line

Another common cause of a Husqvarna 350 chainsaw oiler not working is a clogged oil line. To check for a clogged oil line, remove the oil cap and look down the oil line. If you can see a blockage, you will need to clean or replace the oil line.

Dirty Oil Filter

A dirty oil filter can also cause the oiler to not work properly. To check the oil filter, remove it from the chainsaw and inspect it for dirt and debris. If the filter is dirty, you will need to clean or replace it.

Incorrect Oil Viscosity

Using the wrong oil viscosity can also cause the oiler to not work properly. Husqvarna 350 chainsaws require SAE 30 oil. If you are using a different viscosity of oil, it may not be thick enough to flow through the oil line and lubricate the chain properly.

Faulty Oiler

In rare cases, the oiler itself may be faulty. If you have checked all of the other possible causes and the oiler is still not working, you may need to have it repaired or replaced.

How to Troubleshoot: Husqvarna 350 Chainsaw Oiler Not Working

Symptoms of a Husqvarna 350 Chainsaw Oiler Not Working

There are a few telltale signs that your Husqvarna 350 chainsaw oiler may not be working properly. These include:

The chainsaw is running hot, even when it is not under load.
The chain is smoking or sparking.
The chain is not being lubricated properly, which can lead to damage to the chain and bar.
The oil level in the chainsaw is low.

Troubleshooting a Husqvarna 350 Chainsaw Oiler

If you suspect that your Husqvarna 350 chainsaw oiler is not working properly, you can troubleshoot the problem by following these steps:

1. Check the oil level. The first thing you should do is check the oil level in the chainsaw. To do this, remove the oil cap and look inside the oil reservoir. The oil level should be between the full and add marks on the side of the reservoir. If the oil level is low, add oil to the reservoir until it reaches the full mark.
2. Check the oil filter. The next thing you should check is the oil filter. The oil filter is located on the side of the chainsaw, near the oil reservoir. To check the oil filter, remove the oil filter cover and remove the oil filter. Inspect the oil filter for any damage or debris. If the oil filter is damaged or clogged, replace it with a new oil filter.
3. Check the oil pump. The oil pump is located inside the chainsaw. To check the oil pump, remove the oil cap and look inside the oil reservoir. You should be able to see the oil pump moving up and down as the chainsaw is running. If the oil pump is not moving, or if it is moving erratically, the oil pump may be faulty. You will need to replace the oil pump.
4. Check the oil line. The oil line connects the oil pump to the bar and chain. To check the oil line, follow the oil line from the oil pump to the bar and chain. Inspect the oil line for any damage or leaks. If the oil line is damaged or leaking, you will need to replace it.
5. Check the bar and chain. The bar and chain are lubricated by the oil that is pumped from the oil pump. To check the bar and chain, inspect them for any damage or wear. If the bar or chain is damaged, you will need to replace it.

Preventing Husqvarna 350 Chainsaw Oiler Problems

You can help prevent problems with your Husqvarna 350 chainsaw oiler by following these tips:

Keep the oil level in the chainsaw topped up. The oil level should be between the full and add marks on the side of the reservoir.
Change the oil filter regularly. The oil filter should be changed every 25 hours of operation.
Inspect the oil pump regularly. The oil pump should be inspected every 50 hours of operation.
Inspect the oil line regularly. The oil line should be inspected every 100 hours of operation.
Inspect the bar and chain regularly. The bar and chain should be inspected every 150 hours of operation.

By following these tips, you can help prevent problems with your Husqvarna 350 chainsaw oiler and keep your chainsaw running smoothly.

FAQs: Husqvarna 350 Chainsaw Oiler Not Working

Why is my Husqvarna 350 chainsaw oiler not working?

There are a few possible reasons why your Husqvarna 350 chainsaw oiler may not be working. Here are some of the most common causes:

The oiler is not getting enough oil. This can be caused by a number of factors, such as a clogged oil line, a faulty oil pump, or a low oil level in the tank.
The oiler is not turning on. This can be caused by a faulty oiler switch, a bad connection to the battery, or a problem with the chainsaw’s electrical system.
The oiler is not spraying oil correctly. This can be caused by a clogged oil nozzle, a faulty oiler valve, or a problem with the chainsaw’s air filter.

How can I fix my Husqvarna 350 chainsaw oiler?

To fix your Husqvarna 350 chainsaw oiler, you will need to identify the cause of the problem. Once you have identified the cause, you can take the following steps to fix it:

If the oiler is not getting enough oil, check the oil line for clogs and make sure that the oil level in the tank is sufficient. If the oil line is clogged, you can try to clear it with a wire or a small brush. If the oil level is low, add more oil to the tank.
If the oiler is not turning on, check the oiler switch, the battery connection, and the chainsaw’s electrical system. If the oiler switch is faulty, you can replace it. If the battery connection is loose or corroded, you can tighten it or replace it. If there is a problem with the chainsaw’s electrical system, you will need to take it to a qualified technician for repairs.
If the oiler is not spraying oil correctly, check the oil nozzle, the oiler valve, and the chainsaw’s air filter. If the oil nozzle is clogged, you can try to clear it with a wire or a small brush. If the oiler valve is faulty, you can replace it. If the chainsaw’s air filter is dirty, you can clean it or replace it.

What are the symptoms of a bad Husqvarna 350 chainsaw oiler?

There are a few symptoms that can indicate that your Husqvarna 350 chainsaw oiler is bad. These include:

The chainsaw is running hot. This is because the chain is not being lubricated properly.
The chain is smoking. This is because the chain is overheating.
The chain is skipping or jumping. This is because the chain is not being lubricated properly.
The chain is wearing out quickly. This is because the chain is not being lubricated properly.

How often should I clean my Husqvarna 350 chainsaw oiler?

You should clean your Husqvarna 350 chainsaw oiler every time you clean the chainsaw. This will help to prevent the oiler from becoming clogged and ensure that it is working properly.

What is the best oil to use in my Husqvarna 350 chainsaw oiler?

The best oil to use in your Husqvarna 350 chainsaw oiler is a high-quality chainsaw oil. This type of oil is designed to withstand high temperatures and provide excellent lubrication. You can find high-quality chainsaw oil at most hardware stores.

Next Post You May Like: Husqvarna 445 Chainsaw Oiler Not Working