Husqvarna E235 Chainsaw Chain Oiler Not Working

As a chainsaw owner, there’s nothing more frustrating than having your chain oiler stop working. Not only can it lead to damage to your chainsaw, but it can also be a safety hazard. If your chain isn’t properly lubricated, it can become hot and dangerous to use.

In this guide, I’ll walk you through the steps on how to troubleshoot a Husqvarna E235 chainsaw chain oiler that’s not working. I’ll cover everything from common causes of the problem to specific troubleshooting steps. By the end of this guide, you’ll be able to quickly diagnose and resolve the issue, so you can get back to using your chainsaw without any trouble.

Most Common Reasons Of Husqvarna E235 Chainsaw Chain Oiler Not Working

Most Common Reasons Of Husqvarna E235 Chainsaw Chain Oiler Not Working

1. Insufficient Oil

The most common reason for a chainsaw chain oiler not working is that there is not enough oil in the reservoir. Make sure to check the oil level regularly and add oil as needed.

2. Clogged Oil Hose

Another common cause of a chainsaw chain oiler not working is a clogged oil hose. The oil hose can become clogged with sawdust or other debris, which prevents the oil from flowing to the chain. To fix this problem, you will need to clean the oil hose.

3. Faulty Oil Pump

The oil pump is responsible for pumping oil from the reservoir to the chain. If the oil pump is faulty, it will not be able to pump oil to the chain, which will cause the chain oiler to not work. To fix this problem, you will need to replace the oil pump.

4. Misaligned Oiler Tube

The oiler tube is responsible for delivering oil to the chain. If the oiler tube is misaligned, it will not be able to properly deliver oil to the chain, which will cause the chain oiler to not work. To fix this problem, you will need to realign the oiler tube.

5. Broken Oiler O-Ring

The oiler O-ring is a small rubber ring that seals the oiler tube to the bar. If the oiler O-ring is broken, it will allow oil to leak out of the oiler tube, which will cause the chain oiler to not work. To fix this problem, you will need to replace the oiler O-ring.

How to Troubleshoot: Husqvarna E235 Chainsaw Chain Oiler Not Working

Symptoms of a Chainsaw Chain Oiler Not Working

There are a few symptoms that can indicate that the chain oiler on your Husqvarna E235 chainsaw is not working properly. These include:

The chain is not being lubricated properly, which can lead to it overheating and becoming damaged.
The chain is smoking or sparking, which is a sign that it is overheating.
The chain is making a loud noise, which is also a sign that it is overheating.
The chain is skipping or jumping, which is a sign that it is not properly lubricated.

Troubleshooting a Chainsaw Chain Oiler

If you suspect that the chain oiler on your Husqvarna E235 chainsaw is not working properly, you can troubleshoot the issue by following these steps:

1. Check the oil level. The first thing you should do is check the oil level in the chain oiler reservoir. If the oil level is low, simply add more oil to the reservoir.
2. Check the oil line. The next thing you should do is check the oil line to make sure that it is not kinked or blocked. If the oil line is kinked or blocked, you will need to straighten it out or clear the blockage.
3. Check the oil pump. The oil pump is responsible for pumping oil from the reservoir to the chain. If the oil pump is not working properly, you will need to have it repaired or replaced.
4. Check the oil filter. The oil filter helps to keep dirt and debris out of the oil pump. If the oil filter is clogged, it can prevent the oil from flowing properly to the chain. You should clean or replace the oil filter every few months.

Preventing Chainsaw Chain Oiler Problems

The best way to prevent problems with your chainsaw chain oiler is to keep it clean and well-maintained. Here are a few tips for preventing chainsaw chain oiler problems:

Check the oil level regularly and add oil as needed.
Inspect the oil line regularly for kinks or blockages.
Clean the oil pump regularly to prevent it from becoming clogged.
Replace the oil filter every few months.

By following these tips, you can help to keep your chainsaw chain oiler working properly and prevent costly repairs.

FAQs: Husqvarna E235 Chainsaw Chain Oiler Not Working

Why is my Husqvarna E235 chainsaw chain oiler not working?

There are a few possible reasons why your Husqvarna E235 chainsaw chain oiler may not be working. Here are some of the most common causes:

The oiler is not turned on. Make sure that the oiler switch is in the On position.
The oiler is clogged. The oiler can become clogged with sawdust or other debris, which can prevent the oil from flowing to the chain. To clean the oiler, remove the oiler cover and clean the inside of the oiler with a small brush.
The oiler is not getting enough oil. The oiler may not be getting enough oil if the oil level is low. Check the oil level and add oil if necessary.
The oiler is not working properly. If the oiler is not working properly, it may need to be replaced.

How do I fix my Husqvarna E235 chainsaw chain oiler?

To fix your Husqvarna E235 chainsaw chain oiler, you will need to identify the cause of the problem. Once you have identified the cause, you can follow the steps below to fix the problem:

If the oiler is not turned on, turn it on.
If the oiler is clogged, clean it.
If the oiler is not getting enough oil, add oil.
If the oiler is not working properly, replace it.

How often should I oil the chain on my Husqvarna E235 chainsaw?

You should oil the chain on your Husqvarna E235 chainsaw every time you use it. To oil the chain, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the bar cover.
3. Apply a thin coat of chain oil to the chain.
4. Replace the bar cover.

What type of oil should I use for my Husqvarna E235 chainsaw?

You should use a high-quality, non-detergent, mineral-based chain oil for your Husqvarna E235 chainsaw. Avoid using oil that is too thin or too thick, as this can damage the chain.

How much oil should I use for my Husqvarna E235 chainsaw?

You should use enough oil to coat the chain evenly. A good rule of thumb is to use about one ounce of oil per gallon of fuel.

Additional tips:

Always wear safety glasses when using a chainsaw.
Keep the chain sharp and properly tensioned.
Store the chainsaw in a dry, well-ventilated area.

Next Post You May Like: John Deere Chainsaw Bar Oiler Not Working