Poulan 2000 Chainsaw Oiler Not Working

A Poulan 2000 chainsaw is a powerful and reliable tool, but like any other machine, it can occasionally experience problems. One common issue is a malfunctioning oiler. This can be a frustrating and inconvenient problem, as it can lead to the chainsaw overheating and causing damage. However, it is a relatively easy problem to diagnose and fix. In this guide, I will walk you through the steps of troubleshooting a Poulan 2000 chainsaw oiler that is not working. By following these steps, you can quickly and easily restore your chainsaw to full functionality.

Most Common Reasons Of Poulan 2000 Chainsaw Oiler Not Working

Most Common Reasons Of Poulan 2000 Chainsaw Oiler Not Working

1. Oiler Pump Malfunction

The most common reason for a Poulan 2000 chainsaw oiler not working is a malfunction of the oiler pump. This can be caused by a number of factors, including:

A clogged oiler pump: The oiler pump can become clogged with sawdust or other debris, preventing it from properly pumping oil to the chain.
A damaged oiler pump: The oiler pump can also be damaged if it is struck by a foreign object or if it is subjected to excessive vibration.
A faulty oiler pump: The oiler pump can also fail due to a manufacturing defect.

2. Insufficient Oil Level

Another common reason for a Poulan 2000 chainsaw oiler not working is insufficient oil level. This can be caused by:

Not adding enough oil to the chainsaw: The chainsaw should be filled with oil to the appropriate level. If the oil level is too low, the oiler pump will not be able to properly pump oil to the chain.
Leaking oil tank: The oil tank can leak oil, causing the oil level to drop below the required level.
Damaged oil tank: The oil tank can also be damaged, causing it to leak oil.

3. Clogged Oil Line

A clogged oil line can also prevent the oiler from properly working. This can be caused by:

Sawdust or other debris: The oil line can become clogged with sawdust or other debris, preventing the oil from flowing to the chain.
A kinked or damaged oil line: The oil line can also become kinked or damaged, preventing the oil from flowing to the chain.

4. Misaligned Oiler Hole

The oiler hole on the chainsaw bar can become misaligned, preventing the oil from properly reaching the chain. This can be caused by:

A bent chainsaw bar: The chainsaw bar can become bent, causing the oiler hole to become misaligned.
A damaged chainsaw bar: The chainsaw bar can also be damaged, causing the oiler hole to become misaligned.

5. Clogged Oiler Screen

The oiler screen can also become clogged, preventing the oil from properly reaching the chain. This can be caused by:

Sawdust or other debris: The oiler screen can become clogged with sawdust or other debris, preventing the oil from flowing through the screen.
A dirty oiler screen: The oiler screen can also become dirty, preventing the oil from flowing through the screen.

How to Troubleshoot: Poulan 2000 Chainsaw Oiler Not Working

Symptoms of a Poulan 2000 Chainsaw Oiler Not Working

There are a few signs that your Poulan 2000 chainsaw oiler may not be working properly. These include:

The chainsaw is running hot, even when it is not under load.
The chainsaw is smoking, even when it is not under load.
The chainsaw is making a knocking or rattling noise.
The chainsaw is losing power.
The chainsaw is not cutting through wood as easily as it used to.

If you notice any of these symptoms, it is important to troubleshoot the oiler to determine if it is the source of the problem.

How to Troubleshoot a Poulan 2000 Chainsaw Oiler

To troubleshoot a Poulan 2000 chainsaw oiler, you will need to:

1. Check the oil level.
2. Inspect the oiler pump.
3. Clean the oiler screen.
4. Replace the oiler pump.

Step 1: Check the Oil Level

The first step in troubleshooting a Poulan 2000 chainsaw oiler is to check the oil level. To do this, follow these steps:

1. Turn off the chainsaw and allow it to cool down.
2. Remove the oil cap from the chainsaw.
3. Use a flashlight to check the oil level in the oil reservoir.

The oil level should be between the full and add marks on the oil reservoir. If the oil level is low, add oil to the reservoir until it reaches the full mark.

Step 2: Inspect the Oiler Pump

The next step in troubleshooting a Poulan 2000 chainsaw oiler is to inspect the oiler pump. To do this, follow these steps:

1. Remove the oil cap from the chainsaw.
2. Locate the oiler pump on the side of the chainsaw.
3. Use a flashlight to inspect the oiler pump for damage.

The oiler pump should be free of cracks, damage, and debris. If the oiler pump is damaged, it will need to be replaced.

Step 3: Clean the Oiler Screen

The next step in troubleshooting a Poulan 2000 chainsaw oiler is to clean the oiler screen. To do this, follow these steps:

1. Remove the oil cap from the chainsaw.
2. Locate the oiler screen on the side of the chainsaw.
3. Use a small brush to clean the oiler screen.

The oiler screen should be free of debris. If the oiler screen is clogged, it will need to be cleaned.

Step 4: Replace the Oiler Pump

If the oiler pump is damaged, it will need to be replaced. To replace the oiler pump, follow these steps:

1. Remove the oil cap from the chainsaw.
2. Locate the oiler pump on the side of the chainsaw.
3. Remove the old oiler pump by unscrewing the bolts that hold it in place.
4. Install the new oiler pump by screwing it into place.
5. Add oil to the chainsaw until the oil level reaches the full mark.

Once the oiler pump has been replaced, start the chainsaw and let it run for a few minutes. Check to see if the oiler is working properly by looking for oil droplets on the bar and chain. If the oiler is working properly, you should see oil droplets on the bar and chain every few seconds.

If you do not see oil droplets on the bar and chain, the oiler is not working properly and you will need to troubleshoot the problem further.

Conclusion

By following these steps, you can troubleshoot a Poulan 2000 chainsaw oiler and determine if it is the source of the problem. If the oiler is not working properly, it can be replaced with a new oiler.

FAQs: Poulan 2000 Chainsaw Oiler Not Working

Why isn’t my Poulan 2000 chainsaw oiler working?

There are a few possible reasons why your Poulan 2000 chainsaw oiler might not be working. Here are the most common:

The oiler is not turned on. Make sure that the oiler switch is in the On position.
The oiler reservoir is empty. Check the oiler reservoir to make sure that it is full of oil.
The oil line is clogged. The oil line can become clogged with sawdust or other debris. Clean the oil line to restore proper oil flow.
The oil pump is broken. If the oil pump is broken, it will not be able to pump oil to the chainsaw chain. You will need to have the oil pump repaired or replaced.

How do I turn on the oiler on my Poulan 2000 chainsaw?

To turn on the oiler on your Poulan 2000 chainsaw, follow these steps:

1. Locate the oiler switch. The oiler switch is usually located on the side of the chainsaw, near the handle.
2. Turn the oiler switch to the On position. The oiler switch is a small, red switch.

How do I check the oil level on my Poulan 2000 chainsaw?

To check the oil level on your Poulan 2000 chainsaw, follow these steps:

1. Locate the oiler reservoir. The oiler reservoir is usually located on the side of the chainsaw, near the handle.
2. Remove the oiler cap. The oiler cap is a small, black cap.
3. Check the oil level. The oil level should be between the Full and Add Oil marks on the oiler reservoir.

How do I clean the oil line on my Poulan 2000 chainsaw?

To clean the oil line on your Poulan 2000 chainsaw, follow these steps:

1. Remove the oiler cap.
2. Use a small, stiff wire to clean out the oil line.
3. Reinstall the oiler cap.

How do I replace the oil pump on my Poulan 2000 chainsaw?

To replace the oil pump on your Poulan 2000 chainsaw, follow these steps:

1. Remove the oiler cover.
2. Remove the old oil pump.
3. Install the new oil pump.
4. Reinstall the oiler cover.

Next Post You May Like: Poulan Chainsaw Bar Oiler Not Working