Poulan Chainsaw Oiler Not Working

As a chainsaw owner, there are few things more frustrating than having your saw’s oiler not work properly. Not only can it lead to damage to the saw itself, but it can also be a safety hazard. If your chainsaw’s chain isn’t being properly lubricated, it can become hot and dangerous to use.

That’s why I’ve put together this guide on how to troubleshoot a Poulan chainsaw oiler that’s not working. I’ll walk you through the steps to diagnose the problem and take the necessary steps to fix it. By the end of this guide, you’ll be able to get your saw back up and running in no time.

What is the purpose of this guide

The purpose of this guide is to help you troubleshoot and potentially resolve the issue of a Poulan chainsaw oiler not working. This guide will walk you through the steps to diagnose the problem and take the necessary steps to fix it. By the end of this guide, you’ll be able to get your saw back up and running in no time.

Why Poulan Chainsaw Oiler Not Working

Poulan Chainsaw Oiler Not Working

Low oil level. The most common reason for a Poulan chainsaw oiler not working is low oil level. Make sure the oil tank is filled to the correct level.
Clogged oil line. Another common cause of a Poulan chainsaw oiler not working is a clogged oil line. To check for a clogged oil line, remove the oil cap and look inside the oil tank. If you see any debris or obstructions, you will need to clean the oil line.
Defective oil pump. If the oil pump is defective, it will not be able to pump oil to the chain. To check for a defective oil pump, remove the oil cap and start the chainsaw. If you do not see any oil coming out of the oil port, the oil pump is likely defective.
Incorrect oil viscosity. The oil viscosity should be matched to the temperature conditions. Using the wrong viscosity of oil can cause the oil to thicken and clog the oil line.
Chainsaw not running properly. If the chainsaw is not running properly, it will not be able to circulate oil to the chain. Make sure the chainsaw is properly adjusted and tuned.
Damaged oiler. If the oiler is damaged, it will not be able to pump oil to the chain. You will need to replace the oiler.

How to Troubleshoot: Poulan Chainsaw Oiler Not Working

Symptoms of a Poulan Chainsaw Oiler Not Working

There are a few signs that your Poulan chainsaw oiler may not be working properly. These include:

The chain is not being lubricated properly, which can lead to overheating and damage to the chain and bar.
The oil level in the reservoir is low or empty.
The oiler is making a strange noise or is not working at all.

Troubleshooting a Poulan Chainsaw Oiler

If you suspect that your Poulan chainsaw oiler is not working properly, you can troubleshoot the problem by following these steps:

1. Check the oil level. The first thing you should do is check the oil level in the reservoir. If the oil level is low or empty, fill the reservoir with the correct type of oil.
2. Inspect the oiler. Once you have checked the oil level, you should inspect the oiler itself. Look for any damage or debris that could be preventing the oil from flowing properly. If you see any damage, you will need to replace the oiler.
3. Test the oiler. Once you have inspected the oiler, you should test it to make sure it is working properly. To do this, start the chainsaw and let it run for a few minutes. Then, check the oil level in the reservoir. If the oil level is decreasing, the oiler is working properly. If the oil level is not decreasing, the oiler is not working properly and you will need to replace it.

Preventing Poulan Chainsaw Oiler Problems

You can help prevent Poulan chainsaw oiler problems by following these tips:

Use the correct type of oil. Poulan chainsaws require a specific type of oil. Using the wrong type of oil can damage the oiler and the chainsaw.
Keep the oil level full. Make sure to keep the oil level in the reservoir full at all times. A low oil level can cause the oiler to work harder than necessary, which can lead to problems.
Inspect the oiler regularly. Inspect the oiler regularly for damage or debris. If you see any damage, you should replace the oiler immediately.

By following these tips, you can help prevent Poulan chainsaw oiler problems and keep your chainsaw running smoothly.

FAQs: Poulan Chainsaw Oiler Not Working

Why is my Poulan chainsaw oiler not working?

There are a few possible reasons why your Poulan chainsaw oiler may not be working. Here are some of the most common causes:

The oiler is not getting enough oil. This can be caused by a clogged oil line, a dirty oil filter, or a faulty oil pump.
The oiler is not getting enough air. This can be caused by a clogged air filter or a dirty air intake.
The oiler is not working properly. This can be caused by a faulty oiler valve or a damaged oiler diaphragm.

How do I fix my Poulan chainsaw oiler?

To fix your Poulan chainsaw oiler, you will need to identify the cause of the problem. Once you have identified the cause, you can take the following steps to fix it:

Clogged oil line: Remove the oil line from the chainsaw and clean it with a solvent. If the oil line is kinked or damaged, you will need to replace it.
Dirty oil filter: Remove the oil filter from the chainsaw and clean it with a solvent. If the oil filter is damaged, you will need to replace it.
Faulty oil pump: If the oil pump is faulty, you will need to replace it.
Clogged air filter: Remove the air filter from the chainsaw and clean it with a solvent. If the air filter is damaged, you will need to replace it.
Dirty air intake: Clean the air intake on the chainsaw with a brush.
Faulty oiler valve: If the oiler valve is faulty, you will need to replace it.
Damaged oiler diaphragm: If the oiler diaphragm is damaged, you will need to replace it.

How often should I oil my Poulan chainsaw?

You should oil your Poulan chainsaw every time you use it. To do this, simply add oil to the oil reservoir until the oil level reaches the full mark.

What type of oil should I use for my Poulan chainsaw?

You should use a high-quality, 2-cycle oil for your Poulan chainsaw. This type of oil is designed to mix with gasoline and provide lubrication for the chainsaw’s engine.

How much oil should I mix with gasoline for my Poulan chainsaw?

You should mix 50:1 gasoline to oil for your Poulan chainsaw. This means that for every gallon of gasoline, you should add 1 ounce of oil.

Additional tips for troubleshooting your Poulan chainsaw oiler

If you are having trouble troubleshooting your Poulan chainsaw oiler, you can contact Poulan customer service for assistance.
You can also find helpful information and resources on the Poulan website.
If you are unable to fix your Poulan chainsaw oiler yourself, you can take it to a qualified service center for repairs.

Next Post to Read: Bosch Toy Chainsaw Not Working